On Fri, May 31, 2024 at 12:14:18PM -0400, Frank Li wrote:
> On Thu, May 30, 2024 at 06:08:32PM -0500, Bjorn Helgaas wrote:
> > On Tue, May 28, 2024 at 03:39:21PM -0400, Frank Li wrote:
> > > For the i.MX95, configuration of a LUT is necessary to convert Bus Device
> > > Function (BDF) to stream IDs, which are utilized by both IOMMU and ITS.
> > > This involves examining the msi-map and smmu-map to ensure consistent
> > > mapping of PCI BDF to the same stream IDs. Subsequently, LUT-related
> > > registers are configured. In the absence of an msi-map, the built-in MSI
> > > controller is utilized as a fallback.
> > >
> > > Additionally, register a PCI bus notifier to trigger imx_pcie_add_device()
> > > upon the appearance of a new PCI device and when the bus is an iMX6 PCI
> > > controller. This function configures the correct LUT based on Device Tree
> > > Settings (DTS).
> >
> > This scheme is pretty similar to apple_pcie_bus_notifier(). If we
> > have to do this, I wish it were *more* similar, i.e., copy the
> > function names, bitmap tracking, code structure, etc.
>
> Actually, I refer apple_pcie_bus_notifier(). I can't direct use apple's
> implement because in imx95 have difference PCI host controller, another one
> is PCI ECAM netc controller. At lease function name should be similar with
> apple.
I know it's different hardware, so obviously it can't be exactly the
same. These are the differences that looked possibly unnecessary:
- registering from initcall instead of .probe():
apple_pcie_probe # .probe() method
bus_register_notifier(&pci_bus_type, &apple_pcie_nb)
imx_pcie_init # device_initcall()
bus_register_notifier(&pci_bus_type, &imx_pcie_nb)
- naming BUS_NOTIFY_DEL_DEVICE function:
apple_pcie_release_device()
imx_pcie_del_device()
- tracking entries in use via bitmap vs scanning hardware for
invalid entries:
bitmap_find_free_region # apple
imx_pcie_config_lut # imx
for (i = 0; i < IMX95_MAX_LUT; i++)
regmap_read(imx_pcie->iomuxc_gpr, IMX95_PE0_LUT_DATA1, &data1)
if (data1 & IMX95_PE0_LUT_VLD)
continue
When we fix a bug in one driver, it's easier to check whether other
drivers also need the fix if they use the same structure and names.
Bjorn
