On 6/3/24 17:21, Mudit Sharma wrote:
Add support for BH1745, which is an I2C colour sensor with red, green, blue and clear channels. It has a programmable active low interrupt pin. Interrupt occurs when the signal from the selected interrupt source channel crosses set interrupt threshold high or low level. This driver includes device attributes to configure the following: - Interrupt pin latch: The interrupt pin can be configured to be latched (until interrupt register (0x60) is read or initialized) or update after each measurement. - Interrupt source: The colour channel that will cause the interrupt when channel will cross the set threshold high or low level. This driver also includes device attributes to present valid configuration options/values for: - Integration time - Interrupt colour source - Hardware gain Signed-off-by: Mudit Sharma <muditsharma.info@xxxxxxxxx> ---
LGTM, Reviewed-by: Ivan Orlov <ivan.orlov0322@xxxxxxxxx> -- Kind regards, Ivan Orlov
