On Mon, May 27, 2024 at 11:07:28AM +0300, Abel Vesa wrote:
> Add the pmic-glink node and describe all 3 USB Type-C connectors. Do this
> for USB only, for now. The DP port will come at a later stage since it
> uses a retimer.
>
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 143 ++++++++++++++++++++++++++++++
> 1 file changed, 143 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> index c5c2895b37c7..2fcc994cbb89 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> @@ -49,6 +49,101 @@ chosen {
> stdout-path = "serial0:115200n8";
> };
>
> + pmic-glink {
> + compatible = "qcom,x1e80100-pmic-glink",
> + "qcom,sm8550-pmic-glink",
> + "qcom,pmic-glink";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
> + <&tlmm 123 GPIO_ACTIVE_HIGH>,
> + <&tlmm 125 GPIO_ACTIVE_HIGH>;
With this series applied, I'm getting the following error on boot of the
CRD:
ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: PPM init failed, stop trying
Known issue? Do you need to enable some quirk in the UCSI driver?
Johan
