The adv7535 has some unnecessary entries which can be removed since
they were not setup properly anyway and the defaults work just fine.
Removing them and adding some required regulators make the errors
detected from CHECK_DTBS go away:
reg-names:1: 'edid' was expected
reg-names:2: 'cec' was expected
'avdd-supply' is a required property
'dvdd-supply' is a required property
'pvdd-supply' is a required property
'a2vdd-supply' is a required property
'v3p3-supply' is a required property
Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
---
V2: No Change
V3: Update commit message, no functional changes.
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
index da836172ae46..5c4b68c18bb2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
@@ -302,12 +302,19 @@ pca6416_3: gpio@20 {
adv_bridge: hdmi@3d {
compatible = "adi,adv7535";
- reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
- reg-names = "main", "cec", "edid", "packet";
+ reg = <0x3d>;
+ reg-names = "main";
interrupt-parent = <&gpio4>;
interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
adi,dsi-lanes = <4>;
#sound-dai-cells = <0>;
+ avdd-supply = <&buck5>;
+ dvdd-supply = <&buck5>;
+ pvdd-supply = <&buck5>;
+ a2vdd-supply = <&buck5>;
+ v1p2-supply = <&buck5>;
+ v3p3-supply = <&buck4>;
+
ports {
#address-cells = <1>;
--
2.43.0
