The DSI to HDMI bridge supports hot-plug-detect.The driver supports shared GPIO IRQ pins, so it's save to enable them which allows for hot-plug detect. Signed-off-by: Adam Ford <aford173@xxxxxxxxx> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> --- V3: Update commit message, no functional changes. diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts index e5d3901f2913..da836172ae46 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts @@ -304,6 +304,8 @@ adv_bridge: hdmi@3d { compatible = "adi,adv7535"; reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>; reg-names = "main", "cec", "edid", "packet"; + interrupt-parent = <&gpio4>; + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; adi,dsi-lanes = <4>; #sound-dai-cells = <0>; -- 2.43.0