Add the required DTS node for the USB VBUS output regulator, which is
available on PM7250B. This will provide the VBUS source to connected
peripherals.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/pm7250b.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
index 3bf7cf5d1700..4faed25a787f 100644
--- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
@@ -45,6 +45,12 @@ pmic@PM7250B_SID {
#address-cells = <1>;
#size-cells = <0>;
+ pm7250b_vbus: usb-vbus-regulator@1100 {
+ compatible = "qcom,pm7250b-vbus-reg", "qcom,pm8150b-vbus-reg";
+ reg = <0x1100>;
+ status = "disabled";
+ };
+
pm7250b_temp: temp-alarm@2400 {
compatible = "qcom,spmi-temp-alarm";
reg = <0x2400>;
--
2.45.1
