On Mai 29 2024, Emil Renner Berthing wrote: > Oddly it doesn't work on my Starlight board either. I was thinking the firmware > might set up pinconf differently, but comparing > > /sys/kernel/debug/pinctrl/11910000.pinctrl-pinctrl-starfive/pinconf-pins > > on the two boards shows no differences. I've also not been able to spot any > differences in how the AP6236 module is connected in the schematics for the two > boards, so not really sure how to proceed. I see no difference between Starlight and Visionfive boards, both fail the same way. I also see that sometimes the firmware greeting from brcmfmac occurs _after_ the timeout error from hci0: # journalctl -b -2 | grep -e brcmf_c_preinit_dcmds -e hci0: May 16 12:01:54 beaglev kernel: Bluetooth: hci0: command 0x1001 tx timeout May 16 12:01:54 beaglev kernel: Bluetooth: hci0: BCM: Reading local version info failed (-110) May 16 12:01:54 beaglev kernel: brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Mar 30 2021 01:12:21 version 7.45.98.118 (7d96287 CY) FWID 01-32059766 Is this perhaps a race with the firmware loading? -- Andreas Schwab, schwab@xxxxxxxxxxxxxx GPG Key fingerprint = 7578 EB47 D4E5 4D69 2510 2552 DF73 E780 A9DA AEC1 "And now for something completely different."
