Hi Geert,
Thank you for the review.
On Wed, May 22, 2024 at 2:14 PM Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
>
> Hi Prabhakar,
>
> On Tue, Apr 23, 2024 at 7:59 PM Prabhakar <prabhakar.csengg@xxxxxxxxx> wrote:
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> >
> > Add support to configure bias-disable, bias-pull-up and bias-pull-down
> > properties of the pin.
> >
> > Two new function pointers get_bias_param() and get_bias_val() are
> > introduced as the values in PUPD register differ when compared to
> > RZ/G2L family and RZ/V2H(P) SoC,
> >
> > Value | RZ/G2L | RZ/V2H
> > ---------------------------------
> > 00b: | Bias Disabled | Pull up/down disabled
> > 01b: | Pull-up | Pull up/down disabled
> > 10b: | Pull-down | Pull-down
> > 11b: | Prohibited | Pull-up
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > ---
> > RFC->v2
> > - New patch
>
> Thanks for your patch!
>
> > --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> > +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> > @@ -1139,6 +1175,25 @@ static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
> > arg = rzg2l_read_pin_config(pctrl, SR(off), bit, SR_MASK);
> > break;
> >
> > + case PIN_CONFIG_BIAS_DISABLE:
> > + case PIN_CONFIG_BIAS_PULL_UP:
> > + case PIN_CONFIG_BIAS_PULL_DOWN: {
> > + if (!(cfg & PIN_CFG_PUPD))
> > + return -EINVAL;
> > +
> > + ret = pctrl->data->get_bias_param(rzg2l_read_pin_config(pctrl,
> > + PUPD(off),
> > + bit, PUPD_MASK));
>
> This is rather long, so please split it in two parts, like is done in
> other cases in this function:
>
> arg = rzg2l_read_pin_config(pctrl, PUPD(off), bit, PUPD_MASK);
> ret = pctrl->data->get_bias_param(arg);
>
Agreed, I'll update it as per your suggestion.
Cheers,
Prabhakar
