Convert binding doc from txt to yaml.
Remove redundated "gpio1: gpio@2300000" example.
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
Notes:
Pass dt_binding_check
make dt_binding_check DT_SCHEMA_FILES=fsl,qoriq-gpio.yaml
SCHEMA Documentation/devicetree/bindings/processed-schema.json
CHKDT Documentation/devicetree/bindings
LINT Documentation/devicetree/bindings
DTC_CHK Documentation/devicetree/bindings/gpio/fsl,qoriq-gpio.example.dtb
.../bindings/gpio/fsl,qoriq-gpio.yaml | 80 +++++++++++++++++++
.../devicetree/bindings/gpio/gpio-mpc8xxx.txt | 53 ------------
2 files changed, 80 insertions(+), 53 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/fsl,qoriq-gpio.yaml
delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
diff --git a/Documentation/devicetree/bindings/gpio/fsl,qoriq-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl,qoriq-gpio.yaml
new file mode 100644
index 0000000000000..532fbb631a89a
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/fsl,qoriq-gpio.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/fsl,qoriq-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MPC512x/MPC8xxx/QorIQ/Layerscape GPIO controller
+
+maintainers:
+ - Frank Li <Frank.Li@xxxxxxx>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,mpc5121-gpio
+ - fsl,mpc5125-gpio
+ - fsl,mpc8349-gpio
+ - fsl,mpc8572-gpio
+ - fsl,mpc8610-gpio
+ - fsl,pq3-gpio
+ - items:
+ - enum:
+ - fsl,ls1021a-gpio
+ - fsl,ls1028a-gpio
+ - fsl,ls1043a-gpio
+ - fsl,ls1088a-gpio
+ - fsl,ls2080a-gpio
+ - const: fsl,qoriq-gpio
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-controller: true
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ little-endian:
+ description:
+ GPIO registers are used as little endian. If not
+ present registers are used as big endian by default.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio@1100 {
+ compatible = "fsl,mpc5125-gpio";
+ #gpio-cells = <2>;
+ reg = <0x1100 0x080>;
+ interrupts = <78 0x8>;
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ gpio@2300000 {
+ compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+ reg = <0x2300000 0x10000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ little-endian;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
deleted file mode 100644
index cd28e932bf50e..0000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Freescale MPC512x/MPC8xxx/QorIQ/Layerscape GPIO controller
-
-Required properties:
-- compatible : Should be "fsl,<soc>-gpio"
- The following <soc>s are known to be supported:
- mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq,
- ls1021a, ls1043a, ls2080a, ls1028a, ls1088a.
-- reg : Address and length of the register set for the device
-- interrupts : Should be the port interrupt shared by all 32 pins.
-- #gpio-cells : Should be two. The first cell is the pin number and
- the second cell is used to specify the gpio polarity:
- 0 = active high
- 1 = active low
-
-Optional properties:
-- little-endian : GPIO registers are used as little endian. If not
- present registers are used as big endian by default.
-
-Example of gpio-controller node for a mpc5125 SoC:
-
-gpio0: gpio@1100 {
- compatible = "fsl,mpc5125-gpio";
- #gpio-cells = <2>;
- reg = <0x1100 0x080>;
- interrupts = <78 0x8>;
-};
-
-Example of gpio-controller node for a ls2080a SoC:
-
-gpio0: gpio@2300000 {
- compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
- reg = <0x0 0x2300000 0x0 0x10000>;
- interrupts = <0 36 0x4>; /* Level high type */
- gpio-controller;
- little-endian;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
-};
-
-
-Example of gpio-controller node for a ls1028a/ls1088a SoC:
-
-gpio1: gpio@2300000 {
- compatible = "fsl,ls1028a-gpio", "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
- reg = <0x0 0x2300000 0x0 0x10000>;
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- little-endian;
-};
--
2.34.1
