Re: [PATCH 3/3] arm64: dts: qcom: x1e80100-qcp: Add pmic-glink node with all 3 connectors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, May 27, 2024 at 11:07:29AM +0300, Abel Vesa wrote:
> Add the pmic-glink node and describe all 3 USB Type-C connectors. Do this
> for USB only, for now. The DP port will come at a later stage since it
> uses a mux.
> 
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 143 ++++++++++++++++++++++++++++++
>  1 file changed, 143 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
> index 2061fbe7b75a..a7eecf84b6d6 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
> @@ -23,6 +23,101 @@ chosen {
>  		stdout-path = "serial0:115200n8";
>  	};
>  
> +	pmic-glink {
> +		compatible = "qcom,x1e80100-pmic-glink",
> +			     "qcom,sm8550-pmic-glink",
> +			     "qcom,pmic-glink";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
> +				    <&tlmm 123 GPIO_ACTIVE_HIGH>,
> +				    <&tlmm 125 GPIO_ACTIVE_HIGH>;
> +
> +		connector@0 {
> +			compatible = "usb-c-connector";
> +			reg = <0>;
> +			power-role = "dual";
> +			data-role = "dual";

Same question as for the previous patch.

> +

-- 
With best wishes
Dmitry




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux