On Mon, May 27, 2024 at 11:07:28AM +0300, Abel Vesa wrote: > Add the pmic-glink node and describe all 3 USB Type-C connectors. Do this > for USB only, for now. The DP port will come at a later stage since it > uses a retimer. > > Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx> > --- > arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 143 ++++++++++++++++++++++++++++++ > 1 file changed, 143 insertions(+) Please rebase on top of https://lore.kernel.org/linux-arm-msm/20240429-usb-link-dtsi-v1-12-87c341b55cdf@xxxxxxxxxx/, sorry about it. > > diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts > index c5c2895b37c7..2fcc994cbb89 100644 > --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts > +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts > @@ -49,6 +49,101 @@ chosen { > stdout-path = "serial0:115200n8"; > }; > > + pmic-glink { > + compatible = "qcom,x1e80100-pmic-glink", > + "qcom,sm8550-pmic-glink", > + "qcom,pmic-glink"; > + #address-cells = <1>; > + #size-cells = <0>; > + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, > + <&tlmm 123 GPIO_ACTIVE_HIGH>, > + <&tlmm 125 GPIO_ACTIVE_HIGH>; > + > + connector@0 { > + compatible = "usb-c-connector"; > + reg = <0>; > + power-role = "dual"; > + data-role = "dual"; Does this match the information reported by UCSI? > + -- With best wishes Dmitry
