RE: [PATCH v5 0/3] arm64: dts: add i.MX95 and EVK board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Shawn,

> Subject: [PATCH v5 0/3] arm64: dts: add i.MX95 and EVK board

Would you pick this patchset, or any comments?

Thanks,
Peng.

> 
> Add a minimal i.MX95 dtsi and EVK board dts.
> i.MX95 has a M33 running SCMI firmware, but as of now, the scmi pinctrl
> driver still not ready for i.MX95, so we count on bootloader to configure the
> pinctrl for lpuart and sdhc and it boots well. After pinctrl driver ready, we
> could move to use scmi pinctrl.
> 
> Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> ---
> Changes in v5:
> - Drop unused regulator and alias for now.
> - Fix CHECK_DTB warning.
> - Link to v4: https://lore.kernel.org/r/20240503-imx95-dts-v3-v4-0-
> 535ddc2bde73@xxxxxxx
> 
> Changes in v4:
> - Sort nodes by address
> - Drop coresight nodes
> - Align clock rates for SDHC1-3
> - Drop wdog3 board specific property
> - Link to v3: https://lore.kernel.org/r/20240428-imx95-dts-v3-v3-0-
> 765395f88b9f@xxxxxxx
> 
> Changes in v3:
> - Drop irqsteer node because binding not accepted
> - Pass dtbs_check
> - Link to v2: https://lore.kernel.org/r/20240226-imx95-dts-v2-0-
> 00e36637b07e@xxxxxxx
> 
> Changes in v2:
> - Addressed Rob and Krzysztof's comments, and fix dts_check issue
>   To pass the dtbs_check, need apply:
>   https://lore.kernel.org/all/20240226070910.3379108-1-
> peng.fan@xxxxxxxxxxx/
>   https://lore.kernel.org/all/20240226130243.3820915-1-
> peng.fan@xxxxxxxxxxx/
>   https://lore.kernel.org/all/20240226130516.3821803-1-
> peng.fan@xxxxxxxxxxx/
>   https://lore.kernel.org/all/20240226130826.3824251-1-
> peng.fan@xxxxxxxxxxx/
>   https://lore.kernel.org/all/20240219-imx-mailbox-v8-1-
> 75535a87794e@xxxxxxx/
> 
> - Link to v1: https://lore.kernel.org/r/20240218-imx95-dts-v1-0-
> 2959f89f2018@xxxxxxx
> 
> ---
> Peng Fan (3):
>       dt-bindings: arm: fsl: add i.MX95 19x19 EVK board
>       arm64: dts: freescale: add i.MX95 basic dtsi
>       arm64: dts: freescale: add i.MX95 19x19 EVK minimal board dts
> 
>  Documentation/devicetree/bindings/arm/fsl.yaml    |    6 +
>  arch/arm64/boot/dts/freescale/Makefile            |    1 +
>  arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts |   70 ++
>  arch/arm64/boot/dts/freescale/imx95-clock.h       |  187 ++++
>  arch/arm64/boot/dts/freescale/imx95-power.h       |   55 ++
>  arch/arm64/boot/dts/freescale/imx95.dtsi          | 1050
> +++++++++++++++++++++
>  6 files changed, 1369 insertions(+)
> ---
> base-commit: bb7a2467e6beef44a80a17d45ebf2931e7631083
> change-id: 20240428-imx95-dts-v3-bee59f0e559b
> 
> Best regards,
> --
> Peng Fan <peng.fan@xxxxxxx>





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux