Hi all: This patchset introduce a generic PWM framework driver for Loongson family. Each PWM has one pulse width output signal and one pulse input signal to be measured. It can be found on Loongson-2K series cpus and Loongson LS7A bridge chips. Thanks. ------- V4: patch (2/2): - Rebase on pwm/for-next; - Addressed Uwe's review comments, thanks. - Make use of devm_pwmchip_alloc() function; - Add Limitations description; - Add LOONGSON_ prefix for Loongson pwm register defines; - Keep regs written only once; - Rewrite duty/period calculation; - Add dev_err_probe() in .probe(); - Put the parameters used by PM into a separate structure(pwm_loongson_suspend_store); - Fix some code style. Link to V3: https://lore.kernel.org/linux-pwm/cover.1713164810.git.zhoubinbin@xxxxxxxxxxx/ V3: patch (1/2): - Add Reviewed-by tag from Krzysztof, thanks. patch (2/2): - Several code stlye adjustments, such as line breaks. Link to V2: https://lore.kernel.org/all/cover.1712732719.git.zhoubinbin@xxxxxxxxxxx/ v2: - Remove the dts-related patches and update dts at once after all relevant drivers are complete. patch (1/2): - The dt-binding filename should match compatible, rename it as loongson,ls7a-pwm.yaml; - Update binding description; - Add description for each pwm cell; - Drop '#pwm-cells' from required, for pwm.yaml makes it required already. Link to v1: https://lore.kernel.org/linux-pwm/cover.1711953223.git.zhoubinbin@xxxxxxxxxxx/ Binbin Zhou (2): dt-bindings: pwm: Add Loongson PWM controller pwm: Add Loongson PWM controller support .../bindings/pwm/loongson,ls7a-pwm.yaml | 66 ++++ MAINTAINERS | 7 + drivers/pwm/Kconfig | 12 + drivers/pwm/Makefile | 1 + drivers/pwm/pwm-loongson.c | 295 ++++++++++++++++++ 5 files changed, 381 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/loongson,ls7a-pwm.yaml create mode 100644 drivers/pwm/pwm-loongson.c -- 2.43.0