Pins associated with the 8250 omap unit can be the source of a wakeup in deep sleep states. To be able to wakeup, these pins have to be configured in a special way. To support this configuration add the default and wakeup pinctrl states. Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx> --- .../devicetree/bindings/serial/8250_omap.yaml | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml index 6a7be42da523..402e2ca81017 100644 --- a/Documentation/devicetree/bindings/serial/8250_omap.yaml +++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml @@ -77,6 +77,22 @@ properties: current-speed: true overrun-throttle-ms: true + pinctrl-0: + description: Default pinctrl state + + pinctrl-1: + description: Wakeup pinctrl state + + pinctrl-names: + description: + When present should contain at least "default" describing the default pin + states. The second state called "wakeup" describes the pins in their + wakeup configuration required to exit sleep states. + minItems: 1 + items: + - const: default + - const: wakeup + required: - compatible - reg -- 2.43.0
