Update WiFi SDIO and BT UART related props to better reflect details about the optional onboard RTL8723DS WiFi/BT module. Also correct the compatible used for bluetooth to match the WiFi/BT module used on the board. Fixes: bc3753aed81f ("arm64: dts: rockchip: rock-pi-s add more peripherals") Signed-off-by: Jonas Karlman <jonas@xxxxxxxxx> --- .../boot/dts/rockchip/rk3308-rock-pi-s.dts | 40 +++++++++++++++++-- 1 file changed, 36 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts index 5c702f00b27f..62d18ca769a1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts @@ -17,6 +17,7 @@ aliases { ethernet0 = &gmac; mmc0 = &emmc; mmc1 = &sdmmc; + mmc2 = &sdio; }; chosen { @@ -245,6 +246,20 @@ &pinctrl { pinctrl-names = "default"; pinctrl-0 = <&rtc_32k>; + bluetooth { + bt_reg_on: bt-reg-on { + rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_host: bt-wake-host { + rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + host_wake_bt: host-wake-bt { + rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + gmac { mac_rst: mac-rst { rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; @@ -294,11 +309,24 @@ &sdio { cap-sd-highspeed; cap-sdio-irq; keep-power-in-suspend; - max-frequency = <1000000>; + max-frequency = <100000000>; mmc-pwrseq = <&sdio_pwrseq>; + no-mmc; + no-sd; non-removable; - sd-uhs-sdr104; + sd-uhs-sdr50; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_1v8>; status = "okay"; + + rtl8723ds: wifi@1 { + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake>; + }; }; &sdmmc { @@ -330,12 +358,16 @@ &uart0 { }; &uart4 { + uart-has-rtscts; status = "okay"; bluetooth { - compatible = "realtek,rtl8723bs-bt"; - device-wake-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; + compatible = "realtek,rtl8723ds-bt"; + device-wake-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; host-wake-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>; }; }; -- 2.43.2