JH7110 SoC display pipeline includes a display controller and hdmi. Dc controller IP : Vivante DC8200 Dual Display HDMI IP : INNOSILICON HDMI2.0 As the INNO hdmi ip is also used by rockchip SoC in the driver code, the innosilicon,inno-hdmi.yaml schema containing the common properties for the INNO DesignWare HDMI TX controller isn't a full device tree binding specification, but is meant to be referenced by platform-specific bindings for the IP core. Signed-off-by: keith <keith.zhao@xxxxxxxxxxxxxxxx> --- .../display/bridge/innosilicon,inno-hdmi.yaml | 49 +++++ .../display/rockchip/rockchip,inno-hdmi.yaml | 27 +-- .../starfive/starfive,dsi-encoder.yaml | 92 ++++++++++ .../starfive/starfive,jh7110-dc8200.yaml | 169 ++++++++++++++++++ .../starfive/starfive,jh7110-inno-hdmi.yaml | 75 ++++++++ .../soc/starfive/starfive,jh7110-syscon.yaml | 1 + MAINTAINERS | 8 + 7 files changed, 396 insertions(+), 25 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/bridge/innosilicon,inno-hdmi.yaml create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,dsi-encoder.yaml create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml diff --git a/Documentation/devicetree/bindings/display/bridge/innosilicon,inno-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/innosilicon,inno-hdmi.yaml new file mode 100644 index 000000000000..8540174dcaeb --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/innosilicon,inno-hdmi.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/innosilicon,inno-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Properties for Innosilicon HDMI TX IP + +maintainers: + - Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx> + +description: | + This document defines device tree properties for the Innosilicon HDMI TX + controller (INNO HDMI) IP core. It doesn't constitute a full device tree + binding specification by itself but is meant to be referenced by device tree + bindings for the platform-specific integrations of the INNO HDMI. + + When referenced from platform device tree bindings the properties defined in + this document are defined as follows. The platform device tree bindings are + responsible for defining whether each property is required or optional. + +properties: + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Port node with one endpoint connected to a display controller node. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Port node with one endpoint connected to a hdmi-connector node. + + required: + - port@0 + - port@1 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml index 5b87b0f1963e..589dedfcbee0 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml @@ -16,12 +16,6 @@ properties: - rockchip,rk3036-inno-hdmi - rockchip,rk3128-inno-hdmi - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - clocks: minItems: 1 items: @@ -40,24 +34,6 @@ properties: "#sound-dai-cells": const: 0 - ports: - $ref: /schemas/graph.yaml#/properties/ports - - properties: - port@0: - $ref: /schemas/graph.yaml#/properties/port - description: - Port node with one endpoint connected to a vop node. - - port@1: - $ref: /schemas/graph.yaml#/properties/port - description: - Port node with one endpoint connected to a hdmi-connector node. - - required: - - port@0 - - port@1 - required: - compatible - reg @@ -69,6 +45,7 @@ required: - ports allOf: + - $ref: ../bridge/innosilicon,inno-hdmi.yaml# - $ref: /schemas/sound/dai-common.yaml# - if: properties: @@ -95,7 +72,7 @@ allOf: required: - power-domains -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/starfive/starfive,dsi-encoder.yaml b/Documentation/devicetree/bindings/display/starfive/starfive,dsi-encoder.yaml new file mode 100644 index 000000000000..07aa147a9db1 --- /dev/null +++ b/Documentation/devicetree/bindings/display/starfive/starfive,dsi-encoder.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/starfive/starfive,dsi-encoder.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: starfive jh7110 SoC Encoder + +maintainers: + - Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx> + +description: + Device-Tree bindings for simple encoder. + Simple encoder driver only has basic functionality. + the hardware of dc8200 has 2 output interface, and uses + syscon to select which one to be used. + +properties: + compatible: + const: starfive,dsi-encoder + + starfive,syscon: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to syscon that select crtc output. + - description: Offset of crtc selection + - description: Shift of crtc selection + description: + A phandle to syscon with two arguments that configure select output. + The argument one is the offset of crtc selection, the + argument two is the shift of crtc selection. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + The first port should be the input coming from the associated dc channel. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + The second port should be the output coming from the associated bridge. + + required: + - port@0 + - port@1 + +required: + - compatible + - ports + +additionalProperties: false + +examples: + - | + dssctrl: dssctrl@295b0000 { + compatible = "starfive,jh7110-vout-syscon", "syscon"; + reg = <0x295b0000 0x90>; + }; + + dsi_encoder: dsi_encoder { + compatible = "starfive,dsi-encoder"; + starfive,syscon = <&dssctrl 0x8 0x12>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + /* input */ + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + dsi_input0:endpoint@0 { + reg = <0>; + remote-endpoint = <&dc_out_dpi1>; + }; + }; + /* output */ + port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + dsi_out:endpoint { + remote-endpoint = <&mipi_in>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml new file mode 100644 index 000000000000..a28dfdd471b6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml @@ -0,0 +1,169 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/starfive/starfive,jh7110-dc8200.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STARFIVE JH7110 SoC display controller + +description: + The STARFIVE JH7110 SoC uses the display controller based on Verisilicon IP(DC8200) + to transfer the image data from a video memory buffer to an external LCD interface. + + pipe0 binds HDMI for primary display, + pipe1 binds DSI for external display. + + +------------------------------+ + | | + | | + +----+ | +-------------------+ | +-------+ +------+ +------+ + | +----->+ dc controller 0 +--->----->+HDMICtl| ->+ PHY +-->+PANEL0+ + |AXI | | +-------------------+ | +-------+ +------+ +------+ + | | | | + | | | | + | | | | + | | | | + |APB | | +-------------------+ +---------+ +------+ +-------+ + | +----->+ dc controller 1 +--->---->+ dsiTx +--->+DPHY +->+ PANEL1+ + | | | +-------------------+ +---------+ +------+ +-------+ + +----+ | | + +------------------------------+ + +maintainers: + - Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx> + +properties: + compatible: + const: starfive,jh7110-dc8200 + + reg: + items: + - description: host interface address and length + - description: display physical base address and length + + reg-names: + items: + - const: host + - const: base + + clocks: + items: + - description: Clock for display system noc bus. + - description: Core clock for display controller. + - description: Clock for axi bus to access ddr. + - description: Clock for ahb bus to R/W the phy regs. + - description: Pixel clock for display channel 0. + - description: Pixel clock for display channel 1. + - description: Pixel clock from hdmi. + - description: Pixel clock for soc . + + clock-names: + items: + - const: noc_bus + - const: dc_core + - const: axi_core + - const: ahb + - const: channel0 + - const: channel1 + - const: hdmi_tx + - const: dc_parent + + resets: + items: + - description: Reset for axi bus. + - description: Reset for ahb bus. + - description: Core reset of display controller. + + reset-names: + items: + - const: axi + - const: ahb + - const: core + + interrupts: + items: + - description: The interrupt will be generated when DC finish one frame + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + channel 0 output + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + channel 1 output + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/starfive,jh7110-crg.h> + #include <dt-bindings/reset/starfive,jh7110-crg.h> + dc8200: lcd-controller@29400000 { + compatible = "starfive,jh7110-dc8200"; + reg = <0x29400000 0x100>, + <0x29400800 0x2000>; + reg-names = "host", "base"; + + interrupts = <95>; + clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_DISP_AXI>, + <&voutcrg JH7110_VOUTCLK_DC8200_CORE>, + <&voutcrg JH7110_VOUTCLK_DC8200_AXI>, + <&voutcrg JH7110_VOUTCLK_DC8200_AHB>, + <&voutcrg JH7110_VOUTCLK_DC8200_PIX0>, + <&voutcrg JH7110_VOUTCLK_DC8200_PIX1>, + <&hdmitx0_pixelclk>, + <&voutcrg JH7110_VOUTCLK_DC8200_PIX>; + clock-names = "noc_bus", "dc_core", "axi_core", "ahb", + "channel0", "channel1", "hdmi_tx", "dc_parent"; + resets = <&voutcrg JH7110_VOUTRST_DC8200_AXI>, + <&voutcrg JH7110_VOUTRST_DC8200_AHB>, + <&voutcrg JH7110_VOUTRST_DC8200_CORE>; + reset-names = "axi","ahb", "core"; + + crtc_out: ports { + #address-cells = <1>; + #size-cells = <0>; + + dc_out0: port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + dc_out_dpi0: endpoint@0 { + reg = <0>; + remote-endpoint = <&hdmi_enc>; + }; + + }; + + dc_out1: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + dc_out_dpi1: endpoint@1 { + reg = <1>; + remote-endpoint = <&dsi_enc>; + }; + + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml new file mode 100644 index 000000000000..bfd7dc41fc14 --- /dev/null +++ b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/starfive/starfive,jh7110-inno-hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Starfive JH7110 Innosilicon HDMI controller + +maintainers: + - Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx> + +allOf: + - $ref: ../bridge/innosilicon,inno-hdmi.yaml# + +properties: + compatible: + const: "starfive,jh7110-inno-hdmi" + + clocks: + items: + - description: System clock of HDMI module. + - description: Mclk clock of HDMI audio. + - description: Bclk clock of HDMI audio. + + clock-names: + items: + - const: sysclk + - const: mclk + - const: bclk + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - ports + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/starfive,jh7110-pinctrl.h> + #include <dt-bindings/gpio/gpio.h> + hdmi: hdmi@29590000 { + compatible = "starfive,jh7110-inno-hdmi"; + reg = <0x29590000 0x4000>; + interrupts = <99>; + clocks = <&voutcrg 17>, <&voutcrg 15>, <&voutcrg 16>; + clock-names = "sysclk", "mclk","bclk"; + resets = <&voutcrg 9>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + hdmi_in_vop: endpoint { + remote-endpoint = <&dc_out_dpi0>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml index 0039319e91fe..cf9b657d0e8a 100644 --- a/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml +++ b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml @@ -24,6 +24,7 @@ properties: - enum: - starfive,jh7110-aon-syscon - starfive,jh7110-stg-syscon + - starfive,jh7110-vout-syscon - const: syscon reg: diff --git a/MAINTAINERS b/MAINTAINERS index c675fc296b19..8881652bb8b6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7148,6 +7148,14 @@ T: git https://gitlab.freedesktop.org/drm/misc/kernel.git F: Documentation/devicetree/bindings/display/ste,mcde.yaml F: drivers/gpu/drm/mcde/ +DRM DRIVERS FOR STARFIVE +M: Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx> +L: dri-devel@xxxxxxxxxxxxxxxxxxxxx +S: Maintained +T: git https://gitlab.freedesktop.org/drm/misc/kernel.git +F: Documentation/devicetree/bindings/display/bridge/innosilicon,inno-hdmi.yaml +F: Documentation/devicetree/bindings/display/starfive/ + DRM DRIVER FOR SYNAPTICS R63353 PANELS M: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx> S: Maintained -- 2.27.0