On Sun, 05 May 2024 18:45:44 +0200, Frank Wunderlich wrote: > From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx> > > Add mt7986 based BananaPi R3 Mini SBC and fix some related binding errors. > > Frank Wunderlich (5): > dt-bindings: leds: add led trigger netdev > dt-bindings: clock: mediatek: add address-cells and size-cells to > ethsys > dt-bindings: net: mediatek,net: add reset-cells > dt-bindings: arm64: dts: mediatek: add BananaPi R3 Mini > arm64: dts: mediatek: Add mt7986 based Bananapi R3 Mini > > .../devicetree/bindings/arm/mediatek.yaml | 1 + > .../bindings/clock/mediatek,ethsys.yaml | 6 + > .../devicetree/bindings/leds/common.yaml | 2 + > .../devicetree/bindings/net/mediatek,net.yaml | 3 + > arch/arm64/boot/dts/mediatek/Makefile | 1 + > .../mediatek/mt7986a-bananapi-bpi-r3-mini.dts | 486 ++++++++++++++++++ > 6 files changed, 499 insertions(+) > create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts > > -- > 2.34.1 > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y mediatek/mt7986a-bananapi-bpi-r3-mini.dtb' for 20240505164549.65644-1-linux@xxxxxxxxx: arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dtb: crypto@10320000: interrupts: [[0, 116, 4], [0, 117, 4], [0, 118, 4], [0, 119, 4]] is too short from schema $id: http://devicetree.org/schemas/crypto/inside-secure,safexcel.yaml# arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dtb: crypto@10320000: interrupt-names: ['ring0', 'ring1', 'ring2', 'ring3'] is too short from schema $id: http://devicetree.org/schemas/crypto/inside-secure,safexcel.yaml#
