From: Apurva Nandan <a-nandan@xxxxxx> J784S4 SoCs have three R5F clusters in the MAIN domain, and all of these are configured for LockStep mode at the moment. Switch both of these R5F clusters to Split mode by default to maximize the number of R5F cores. The MCU R5F cluster continues to be in the preferred LockStep mode. Note that this configuration is the default for remoteproc mode (kernel driver boots the R5F processors). These will be overridden for early-booted remoteprocs through the corresponding IPC-only support in the K3 R5F remoteproc driver. Signed-off-by: Apurva Nandan <a-nandan@xxxxxx> --- arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi index 6a4554c6c9c1..fa4a1008a587 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi @@ -1811,7 +1811,7 @@ ufs@4e84000 { main_r5fss0: r5fss@5c00000 { compatible = "ti,j721s2-r5fss"; - ti,cluster-mode = <1>; + ti,cluster-mode = <0>; #address-cells = <1>; #size-cells = <1>; ranges = <0x5c00000 0x00 0x5c00000 0x20000>, @@ -1851,7 +1851,7 @@ main_r5fss0_core1: r5f@5d00000 { main_r5fss1: r5fss@5e00000 { compatible = "ti,j721s2-r5fss"; - ti,cluster-mode = <1>; + ti,cluster-mode = <0>; #address-cells = <1>; #size-cells = <1>; ranges = <0x5e00000 0x00 0x5e00000 0x20000>, @@ -1891,7 +1891,7 @@ main_r5fss1_core1: r5f@5f00000 { main_r5fss2: r5fss@5900000 { compatible = "ti,j721s2-r5fss"; - ti,cluster-mode = <1>; + ti,cluster-mode = <0>; #address-cells = <1>; #size-cells = <1>; ranges = <0x5900000 0x00 0x5900000 0x20000>, -- 2.34.1