TI SoCs (J7200, J721E, J721S2 & J784S4) have multiple R5F clusters in the MAIN domain. All of these clusters are configured for LockStep mode at the moment. Switch all of these R5F clusters to Split mode by default to maximize the number of R5F cores. The MCU R5F cluster continues to be in the preferred LockStep mode. Note that this configuration is the default for remoteproc mode (kernel driver boots the R5F processors). These will be overridden for early-booted remoteprocs through the corresponding IPC-only support in the K3 R5F remoteproc driver. Apurva Nandan (1): arm64: dts: ti: k3-j784s4-main: Switch MAIN R5F clusters to Split-mode Beleswar Padhi (1): arm64: dts: ti: k3-j721s2-main: Switch MAIN R5F clusters to Split-mode Suman Anna (2): arm64: dts: ti: k3-j7200-main: Switch MAIN R5F cluster to Split-mode arm64: dts: ti: k3-j721e-main: Switch MAIN R5F clusters to Split-mode arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 2 +- arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 4 ++-- arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 4 ++-- arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 6 +++--- 4 files changed, 8 insertions(+), 8 deletions(-) -- 2.34.1
