Re: [PATCH RFC 2/3] power: mxs_power: add driver for mxs power subsystem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> Stefan Wahren <stefan.wahren@xxxxxxxx> hat am 3. Februar 2015 um 21:41
> geschrieben:
>
>
> Hi Sebastian,
>
> > Sebastian Reichel <sre@xxxxxxxxxx> hat am 28. Januar 2015 um 23:59
> > geschrieben:
> >
> >
> > Hi,
> >
> > On Wed, Jan 28, 2015 at 11:22:05PM +0100, Stefan Wahren wrote:
> > > > Mark Brown <broonie@xxxxxxxxxx> hat am 27. Januar 2015 um 20:43
> > > > geschrieben:
> > > > On Tue, Jan 27, 2015 at 07:35:09PM +0100, Stefan Wahren wrote:
> > > >
> > > changing the switching frequency is not a common feature for this IC. In
> > > most
> > > cases the clock for the DC-DC switching frequency runs at 24 MHz
> > > (ref_xtal).
> > > Unfortunatelly this could cause interferences for example in UHF band. So
> > > switching to ref_pll and changing clock divider is a option to avoid such
> > > interferences without changing hardware.
> > >
> > > I decided to implement it as a module parameter, because i see it's a
> > > configuration option.
> >
> > I think its best to use a DT property then. That way it can be set
> > appropiatly for boards known to use a band, which could have
> > interference problems.
> >
> > So just add a simple property (without a subnode). If I understand
> > Mark correctly, there's a high chance more drivers will need to
> > describe the switching frequency, so I suggest to use a vendor
> > independent property name:
> >
> > switching-frequency = <12345>;
>
> i'm not sure. So here is the complete current state (power and regulator
> binding
> from imx28.dtsi) including my suggestion for the new property:
>
> power: power@80044000 {
> compatible = "fsl,imx28-power"; /* handled by mxs_power.c */
> #address-cells = <1>;
> #size-cells = <1>;
> reg = <0x80044000 0x2000>;
> interrupts = <6>;
> switching-frequency = <24000000>; /* new property */
> ranges;
>
> reg_vddd: regulator@80044040 {
> reg = <0x80044040 0x10>,
> <0x80044010 0x10>,
> <0x800440c0 0x10>;
> reg-names = "base-address",
> "v5ctrl-address",
> "status-address";
> compatible = "fsl,imx28-vddd"; /* handled by mxs-regulator.c */
> regulator-name = "vddd";
> regulator-min-microvolt = <1350000>;
> regulator-max-microvolt = <1550000>;
> vddd-supply = <&reg_vdda>;
> };
>
> reg_vdda: regulator@80044050 {
> reg = <0x80044050 0x10>,
> <0x80044010 0x10>,
> <0x800440c0 0x10>;
> reg-names = "base-address",
> "v5ctrl-address",
> "status-address";
> compatible = "fsl,imx28-vdda"; /* handled by mxs-regulator.c */
> regulator-name = "vdda";
> regulator-min-microvolt = <1725000>;
> regulator-max-microvolt = <1950000>;
> vdda-supply = <&reg_vddio>;
> };
>
> reg_vddio: regulator@80044060 {
> reg = <0x80044060 0x10>,
> <0x80044010 0x10>,
> <0x800440c0 0x10>;
> reg-names = "base-address",
> "v5ctrl-address",
> "status-address";
> compatible = "fsl,imx28-vddio"; /* handled by mxs-regulator.c */
> regulator-name = "vddio";
> regulator-min-microvolt = <3000000>;
> regulator-max-microvolt = <3575000>;
> regulator-microvolt-offset = <80000>;
> };
> };
>
> Please correct me if i'm wrong.
>
> Stefan

Gentle Ping.

Stefan

>
> >
> > -- Sebastian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux