* Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx> [150218 07:03]: > Implement DT quirks for the am33xx beaglebone boards. > --- /dev/null > +++ b/arch/arm/mach-omap2/am33xx-dt-quirks.c ... > + > +/* > + * The board IDs for am33xx board are in an I2C EEPROM > + * We are very early in the boot process so we have to > + * read the EEPROM directly without using the I2C layer. > + * > + * Note that we rely on the bootloader setting up the muxes > + * (which is the case for u-boot). > + */ > + > +/* I2C Status Register (OMAP_I2C_STAT): */ > +#define OMAP_I2C_STAT_XDR (1 << 14) /* TX Buffer draining */ > +#define OMAP_I2C_STAT_RDR (1 << 13) /* RX Buffer draining */ > +#define OMAP_I2C_STAT_BB (1 << 12) /* Bus busy */ > +#define OMAP_I2C_STAT_ROVR (1 << 11) /* Receive overrun */ > +#define OMAP_I2C_STAT_XUDF (1 << 10) /* Transmit underflow */ > +#define OMAP_I2C_STAT_AAS (1 << 9) /* Address as slave */ > +#define OMAP_I2C_STAT_BF (1 << 8) /* Bus Free */ > +#define OMAP_I2C_STAT_XRDY (1 << 4) /* Transmit data ready */ > +#define OMAP_I2C_STAT_RRDY (1 << 3) /* Receive data ready */ > +#define OMAP_I2C_STAT_ARDY (1 << 2) /* Register access ready */ > +#define OMAP_I2C_STAT_NACK (1 << 1) /* No ack interrupt enable */ > +#define OMAP_I2C_STAT_AL (1 << 0) /* Arbitration lost int ena */ ... Uhh I don't like the idea of duplicating the i2c-omap.c driver under arch/arm.. And in general we should initialize things later rather than earlier. What's stopping doing these quirk checks later on time with just a regular device driver, something like drivers/misc/bbone-quirks.c? Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
