Re: [PATCH net] net: dsa: mt7530: fix impossible MDIO address and issue warning

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/30/24 02:45, Daniel Golle wrote:
The MDIO address of the MT7530 and MT7531 switch ICs can be configured
using bootstrap pins. However, there are only 4 possible options for the
switch itself: 7, 15, 23 and 31 (ie. only 3 and 4 can be configured, bit
0~2 are always 111). Practically all boards known as of today use the
default setting which is to have the switch respond to address 31, while
the built-in switch PHYs respond to address 0~4 in this case.

I'm not aware of the MT7531 switch having bootstrap pins to configure the
PHY address. Are you sure this is the case?

Arınç




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux