> ---------------------------------------------------------------------- > On 29/03/2024 20:48, Witold Sadowski wrote: > > Add support for Marvell IP modification - clock divider, and PHY > > config, and IRQ clearing. > > Clock divider block is build into Cadence XSPI controller and is > > connected directly to 800MHz clock. > > As PHY config is not set directly in IP block, driver can load custom > > PHY configuration values. > > To correctly clear interrupt in Marvell implementation MSI-X must be > > cleared too. > > Please wrap commit message according to Linux coding style / submission > process (neither too early nor over the limit): > https://urldefense.proofpoint.com/v2/url?u=https- > 3A__elixir.bootlin.com_linux_v6.4- > 2Drc1_source_Documentation_process_submitting-2Dpatches.rst- > 23L597&d=DwICaQ&c=nKjWec2b6R0mOyPaz7xtfQ&r=GKgcn-g6ZX- > JmCL3S2qKgVQhvhv7hu2n8En- > dZbLTa8&m=jNf5MYEcexHML6io2koiqn18Pmkh2qqc0FL48zdCoojbFX06omzl2_Z0CpBeHn79 > &s=B038dgBUB0Gvl63ExMDFoXuomZBSZPHLpScHOtTax0Q&e= > > > > > Signed-off-by: Witold Sadowski <wsadowski@xxxxxxxxxxx> > > --- > > > > + > > +static bool cdns_xspi_get_hw_overlay(struct platform_device *pdev) { > > + int err; > > + > > + err = device_property_match_string(&pdev->dev, > > + "compatible", "mrvl,xspi-nor"); > > No, do not add matching in some random parts of the code, but use driver > match/data from ID table. Ok. As I have written in different mail, a little bit of manual matching Will be necessary to handle both ACPI and device-tree case. > > .... > > > > > + cdns_xspi_print_phy_config(cdns_xspi); > > ret = cdns_xspi_controller_init(cdns_xspi); > > if (ret) { > > dev_err(dev, "Failed to initialize controller\n"); @@ -613,6 > +911,9 > > @@ static const struct of_device_id cdns_xspi_of_match[] = { > > { > > .compatible = "cdns,xspi-nor", > > }, > > + { > > + .compatible = "mrvl,xspi-nor", > > This falsely suggest they are compatible :/ I'm not sure if I understand what do you mean. cdns, xspi will be compatible with overlay, as it won't touch any additional HW. It possibly fail in second direction, as overlay handling code will not see expected values. > > > + }, > > { /* end of table */} > > }; > > MODULE_DEVICE_TABLE(of, cdns_xspi_of_match); > > Best regards, > Krzysztof Regards Witek
