Hi, Please Cc lakml for patches in this area in future. On Wed, Feb 18, 2015 at 06:53:11PM +0000, Jorge Ramirez-Ortiz wrote: > [PATCH 1/2] Documentation: bindings: add optional fifo size property > [PATCH 2/2] drivers/tty: pl011: read fifo size from OF if present > > > These patches aim at resolving an issue present on some of the amba pl011 > uarts. Which systems are affected? Neither of your two patches add the property to any dts file. > Some of these arm type uarts have their fifo sizes not defined in terms of the > amba_rev register. What does said register actually contain? Is this a full PL011, or a cut-down SBSA UART? Mark. > Those uarts should be able to declare their fifo sizes using the optional > property "fifo-size" in the device tree. This device tree setting shall take > precedence over any other values. > > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
