No new warning added by make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j8 CHECK_DTBS=y freescale/imx8qm-mek.dtb Signed-off-by: Frank Li <Frank.Li@xxxxxxx> --- Changes in v4: - Fix ">" at flexcan2 and flexcan3's pinctrl - try best to keep order as label's alphabetically. Exited code have not not order by label's alphabetically. iomux put to last to keep consistent with other files - fixe upercase in address in imx8qm-ss-audio.dtsi - keep label's alphabetically in imx8qm-ss-audio.dtsi - use name regulator-fec2-nvcc - Link to v3: https://lore.kernel.org/r/20240422-dts_8qm_audio-v3-0-680cee731ced@xxxxxxx Changes in v3: - sensor use general name - use tab in pinctrl - remove extra space for fsl,asrc-rate - change to bt_sco_codec: audio-codec-bt - audio-routing = "Headphone Jack", "HP_L", ++ "Headphone Jack", "HP_R", ++ "Ext Spk", "SPK_LP", ++ "Ext Spk", "SPK_LN", ++ "Ext Spk", "SPK_RP", ++ "Ext Spk", "SPK_RN", ++ "LINPUT1", "Mic Jack", ++ "Mic Jack", "MICB"; - align clock under sai - remove unused "FIXME: .." - Link to v2: https://lore.kernel.org/r/20240418-dts_8qm_audio-v2-0-e40fe76b60a6@xxxxxxx Changes in v2: - move vendor property to last, just before status - use audio-codec@1a as node name - about dual license problem, need relicense whole included tree's dts file which out scope this patch - About delete-node imx8qm-ss-audio.dtsi are not supposed to be included directly. imx8qm.dtsi is supposed to be included by other board dts file. in imx8qm.dtsi /* sorted in register address */ + #include "imx8-ss-audio.dtsi" #include "imx8-ss-vpu.dtsi" #include "imx8-ss-img.dtsi" #include "imx8-ss-dma.dtsi" @@ -473,3 +558,4 @@ drc_crit0: trip1 { #include "imx8qm-ss-dma.dtsi" #include "imx8qm-ss-conn.dtsi" #include "imx8qm-ss-lsio.dtsi" +#include "imx8qm-ss-audio.dtsi" "imx8qm-ss-audio" will overwrite some common audio node in "imx8-ss-audio.dtsi" acm, and sai4/5 are defined in imx8-ss-audio.dtsi for common part for all imx8qm\imx8qxp\imx8dxl. - Link to v1: https://lore.kernel.org/r/20240415-dts_8qm_audio-v1-0-2976c35a0c52@xxxxxxx --- Frank Li (10): arm64: dts: imx8-ss-audio: remove memory-region = <&dsp_reserved>; arm64: dts: imx8qm-ss-audio: add audio nodes arm64: dts: imx8qm-mek: add sai and wm8960 support arm64: dts: imx8x: add cm41 subsystem dtsi arm64: dts: imx8qm-mek: add i2c0 and children devices arm64: dts: imx8qm-mek: add cm41_i2c and children devices arm64: dts: imx8qm-mek: add flexcan support arm64: dts: imx8qm-mek: add lsio mu5 and mu6 arm64: dts: imx8qm: add ocopt and fec_mac[0,1] arm64: dts: imx8qm-mek: add fec2 support arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi | 1 - arch/arm64/boot/dts/freescale/imx8-ss-cm41.dtsi | 68 +++ arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 344 +++++++++++++++ arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi | 473 +++++++++++++++++++++ arch/arm64/boot/dts/freescale/imx8qm.dtsi | 102 +++++ 5 files changed, 987 insertions(+), 1 deletion(-) --- base-commit: eda9714fe6d9e6e5690992ce7dd42b13a5be7803 change-id: 20240402-dts_8qm_audio-e1e1697c9bf6 Best regards, --- Frank Li <Frank.Li@xxxxxxx>
