From: Siddharth Vadapalli <s-vadapalli@xxxxxx> The SK-Ethernet-DC01 Add-On Ethernet Card for AM62A7-SK board supports RGMII mode. Add overlay to enable the second CPSW3G port in RGMII-RXID mode with the Add-On Ethernet Card. Signed-off-by: Siddharth Vadapalli <s-vadapalli@xxxxxx> Signed-off-by: Chintan Vankar <c-vankar@xxxxxx> --- Link to v1: https://lore.kernel.org/r/20230424111945.3865240-3-s-vadapalli@xxxxxx/ Changes from v1 to v2: - Since support for device tree overlays for am62a7-sk is already enabled by commit "635ed9715194", it is removed from this series. arch/arm64/boot/dts/ti/Makefile | 3 + .../dts/ti/k3-am62a7-sk-ethernet-dc01.dtso | 61 +++++++++++++++++++ 2 files changed, 64 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am62a7-sk-ethernet-dc01.dtso diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index c76b41f86527..8c55e46d9f98 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -27,6 +27,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb # Boards with AM62Ax SoC dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk-ethernet-dc01.dtbo # Boards with AM62Px SoC dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb @@ -123,6 +124,8 @@ k3-am62a7-sk-csi2-ov5640-dtbs := k3-am62a7-sk.dtb \ k3-am62x-sk-csi2-ov5640.dtbo k3-am62a7-sk-csi2-tevi-ov5640-dtbs := k3-am62a7-sk.dtb \ k3-am62x-sk-csi2-tevi-ov5640.dtbo +k3-am62a7-sk-ethernet-dc01-dtbs := k3-am62a7-sk.dtb \ + k3-am62a7-sk-ethernet-dc01.dtbo k3-am62a7-sk-hdmi-audio-dtbs := k3-am62a7-sk.dtb k3-am62x-sk-hdmi-audio.dtbo k3-am62p5-sk-csi2-imx219-dtbs := k3-am62p5-sk.dtb \ k3-am62x-sk-csi2-imx219.dtbo diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk-ethernet-dc01.dtso b/arch/arm64/boot/dts/ti/k3-am62a7-sk-ethernet-dc01.dtso new file mode 100644 index 000000000000..f6d5a089a717 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk-ethernet-dc01.dtso @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0 +/** + * DT Overlay for second CPSW3G port in RGMII mode using SK-ETHERNET-DC01 + * Add-On Daughtercard with AM62A7-SK. + * + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/net/ti-dp83867.h> +#include "k3-pinctrl.h" + +&{/} { + aliases { + ethernet1 = "/bus@f0000/ethernet@8000000/ethernet-ports/port@2"; + }; +}; + +&cpsw3g { + pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>; +}; + +&cpsw_port2 { + status = "okay"; + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy1>; +}; + +&cpsw3g_mdio { + #address-cells = <1>; + #size-cells = <0>; + + cpsw3g_phy1: ethernet-phy@1 { + reg = <1>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + }; +}; + +&main_pmx0 { + main_rgmii2_pins_default: main-rgmii2-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x0184, PIN_INPUT, 0) /* (AA21) RGMII2_RD0 */ + AM62AX_IOPAD(0x0188, PIN_INPUT, 0) /* (Y20) RGMII2_RD1 */ + AM62AX_IOPAD(0x018c, PIN_INPUT, 0) /* (AB21) RGMII2_RD2 */ + AM62AX_IOPAD(0x0190, PIN_INPUT, 0) /* (AB20) RGMII2_RD3 */ + AM62AX_IOPAD(0x0180, PIN_INPUT, 0) /* (AA20) RGMII2_RXC */ + AM62AX_IOPAD(0x017c, PIN_INPUT, 0) /* (W18) RGMII2_RX_CTL */ + AM62AX_IOPAD(0x016c, PIN_INPUT, 0) /* (AA19) RGMII2_TD0 */ + AM62AX_IOPAD(0x0170, PIN_INPUT, 0) /* (Y18) RGMII2_TD1 */ + AM62AX_IOPAD(0x0174, PIN_INPUT, 0) /* (AA18) RGMII2_TD2 */ + AM62AX_IOPAD(0x0178, PIN_INPUT, 0) /* (W17) RGMII2_TD3 */ + AM62AX_IOPAD(0x0168, PIN_INPUT, 0) /* (AB19) RGMII2_TXC */ + AM62AX_IOPAD(0x0164, PIN_INPUT, 0) /* (Y19) RGMII2_TX_CTL */ + >; + }; +}; -- 2.34.1
