Hi Marek On 3/19/24 05:05, Marek Vasut wrote:
This patch adds STM32 PWR regulators DT support on stm32mp131. This requires TFA to clear RCC_SECCFGR, is disabled by default and can only be enabled on board DT level. Signed-off-by: Marek Vasut <marex@xxxxxxx> --- Cc: Alexandre Torgue <alexandre.torgue@xxxxxxxxxxx> Cc: Conor Dooley <conor+dt@xxxxxxxxxx> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx> Cc: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx> Cc: Rob Herring <robh@xxxxxxxxxx> Cc: devicetree@xxxxxxxxxxxxxxx Cc: kernel@xxxxxxxxxxxxxxxxxx Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx Cc: linux-kernel@xxxxxxxxxxxxxxx Cc: linux-stm32@xxxxxxxxxxxxxxxxxxxxxxxxxxxx --- arch/arm/boot/dts/st/stm32mp131.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi index 3900f32da797b..58b8ae759998d 100644 --- a/arch/arm/boot/dts/st/stm32mp131.dtsi +++ b/arch/arm/boot/dts/st/stm32mp131.dtsi @@ -1092,6 +1092,30 @@ rcc: rcc@50000000 { <&scmi_clk CK_SCMI_LSI>; };+ pwr_regulators: pwr@50001000 {+ compatible = "st,stm32mp1,pwr-reg"; + reg = <0x50001000 0x10>; + status = "disabled"; + + reg11: reg11 { + regulator-name = "reg11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + reg18: reg18 { + regulator-name = "reg18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + usb33: usb33 { + regulator-name = "usb33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + exti: interrupt-controller@5000d000 { compatible = "st,stm32mp13-exti", "syscon"; interrupt-controller;
Applied on stm32-next. Cheers Alex
