Describe the Ethernet LEDs for the Raspberry Pi 4 model B board as well as the Raspberry Pi 4 CM board. The Raspberry Pi 400 board does not include RJ45 connector LEDs so the 'leds' node is deleted accordingly. The Ethernet PHY LEDs are numbered in the PHY package/pin list from LED1 through LED4, however their address within the LED registers function selector is 0-indexed. Signed-off-by: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx> --- Changes in v3: - explain LED numbering and add comments - rename individual LED DT nodes to led@<N> Changes in v2: - added function = LED_FUNCTION_LAN - rebased against latest tree .../arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts | 22 +++++++++++++++++ .../arm/boot/dts/broadcom/bcm2711-rpi-400.dts | 1 + .../boot/dts/broadcom/bcm2711-rpi-cm4-io.dts | 24 +++++++++++++++++++ 3 files changed, 47 insertions(+) diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts index cfc8cb5e10ba..353bb50ce542 100644 --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts @@ -5,6 +5,7 @@ #include "bcm283x-rpi-led-deprecated.dtsi" #include "bcm283x-rpi-usb-peripheral.dtsi" #include "bcm283x-rpi-wifi-bt.dtsi" +#include <dt-bindings/leds/common.h> / { compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; @@ -204,6 +205,27 @@ &genet_mdio { phy1: ethernet-phy@1 { /* No PHY interrupt */ reg = <0x1>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + /* LED1 */ + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + /* LED2 */ + led@1 { + reg = <1>; + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts index 5a2869a18bd5..ca9be91b4f36 100644 --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts @@ -30,6 +30,7 @@ &expgpio { &genet_mdio { clock-frequency = <1950000>; + /delete-node/ leds; }; &led_pwr { diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts index 7c6a5bdf48aa..6bc77dd48c0d 100644 --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; +#include <dt-bindings/leds/common.h> #include "bcm2711-rpi-cm4.dtsi" #include "bcm283x-rpi-led-deprecated.dtsi" #include "bcm283x-rpi-usb-host.dtsi" @@ -110,6 +111,29 @@ rtc@51 { }; }; +&phy1 { + leds { + #address-cells = <1>; + #size-cells = <0>; + + /* LED2 */ + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + /* LED3 */ + led@2 { + reg = <2>; + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; +}; + &led_act { gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; }; -- 2.34.1