Re: [PATCH] drm/panel-edp: Add panel CSOT MNB601LS1-1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Mon, Apr 22, 2024 at 6:28 PM Xuxin Xiong
<xuxinxiong@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
>
> Yes, I read the edid from the panels, one is CSO and the other is CSW.
> The details are as follows, please help check. Thank you!
>
>
> 1. MNC207QS1-1
> edid-decode (hex):
> 00 ff ff ff ff ff ff 00 0e 6f 00 12 e7 00 00 00
> 1e 21 01 04 a5 1b 12 78 03 8a d5 9c 5e 59 90 25
> 1b 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
> 01 01 01 01 01 01 ae 3f 80 18 71 b0 23 40 30 20
> 36 00 07 a4 10 00 00 1a 00 00 00 fd 00 28 3c 4b
> 4b 11 01 0a 20 20 20 20 20 20 00 00 00 fe 00 43
> 53 4f 54 20 54 39 0a 20 20 20 20 20 00 00 00 fe
> 00 4d 4e 43 32 30 37 51 53 31 2d 31 0a 20 00 32
> ----------------
> Block 0, Base EDID:
> EDID Structure Version & Revision: 1.4
> Vendor & Product Identification:
> Manufacturer: CSO
> Model: 4608
> Serial Number: 231
> Made in: week 30 of 2023
> Basic Display Parameters & Features:
> Digital display
> Bits per primary color channel: 8
> DisplayPort interface
> Maximum image size: 27 cm x 18 cm
> Gamma: 2.20
> Supported color formats: RGB 4:4:4
> First detailed timing includes the native pixel format and preferred refresh rate
> Display is continuous frequency
> Color Characteristics:
> Red : 0.6113, 0.3671
> Green: 0.3496, 0.5644
> Blue : 0.1474, 0.1064
> White: 0.3134, 0.3291
> Established Timings I & II: none
> Standard Timings: none
> Detailed Timing Descriptors:
> DTD 1: 1920x1200 60.000 Hz 8:5 74.100 kHz 163.020 MHz (263 mm x 164 mm)
> Hfront 48 Hsync 32 Hback 200 Hpol P
> Vfront 3 Vsync 6 Vback 26 Vpol N
> Display Range Limits:
> Monitor ranges (Bare Limits): 40-60 Hz V, 75-75 kHz H, max dotclock 170 MHz
> Alphanumeric Data String: 'CSOT T9'
> Alphanumeric Data String: 'MNC207QS1-1'
> Checksum: 0x32
>
> 2. MNB601LS1-1
> edid-decode (hex):
>
> 00 ff ff ff ff ff ff 00 0e 77 00 11 00 00 00 00
> 00 22 01 04 95 1a 0e 78 03 a1 35 9b 5e 58 91 25
> 1c 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
> 01 01 01 01 01 01 09 1e 56 dc 50 00 28 30 30 20
> 36 00 00 90 10 00 00 1a 00 00 00 fd 00 28 3c 30
> 30 08 01 0a 20 20 20 20 20 20 00 00 00 fe 00 43
> 53 4f 54 20 54 39 0a 20 20 20 20 20 00 00 00 fe
> 00 4d 4e 42 36 30 31 4c 53 31 2d 31 0a 20 00 37
> ----------------
> Block 0, Base EDID:
> EDID Structure Version & Revision: 1.4
> Vendor & Product Identification:
> Manufacturer: CSW
> Model: 4352
> Made in: 2024
> Basic Display Parameters & Features:
> Digital display
> Bits per primary color channel: 6
> DisplayPort interface
> Maximum image size: 26 cm x 14 cm
> Gamma: 2.20
> Supported color formats: RGB 4:4:4
> First detailed timing includes the native pixel format and preferred refresh rate
> Display is continuous frequency
> Color Characteristics:
> Red : 0.6074, 0.3691
> Green: 0.3437, 0.5673
> Blue : 0.1445, 0.1123
> White: 0.3134, 0.3291
> Established Timings I & II: none
> Standard Timings: none
> Detailed Timing Descriptors:
> DTD 1: 1366x768 60.001 Hz 683:384 48.480 kHz 76.890 MHz (256 mm x 144 mm)
> Hfront 48 Hsync 32 Hback 140 Hpol P
> Vfront 3 Vsync 6 Vback 31 Vpol N
> Display Range Limits:
> Monitor ranges (Bare Limits): 40-60 Hz V, 48-48 kHz H, max dotclock 80 MHz
> Alphanumeric Data String: 'CSOT T9'
> Alphanumeric Data String: 'MNB601LS1-1'
> Checksum: 0x37

OK. This made me look a little deeper. I believe that the three-letter
code is managed by UEFI and I found:

https://uefi.org/PNP_ID_List

...as far as I can tell "CSW" is actually correct for CSOT but "CSO"
was _not_. Looks as if CSO was supposed to be for "California
Institute of Technology" (Caltech). :(

We're probably OK with the recent work that Hsin-Yi did in commit
bf201127c1b8 ("drm/panel-edp: Match edp_panels with panel identity")
to match against the panel name even if Caltech does ship a "CSO"
0x1200 in the future since it looks like the string you added matches
the panel.

That being said, is there any chance that it's not too late and you
can get CSOT to fix the EDID on "MNC207QS1-1"? Can you also make sure
that they're aware of this and don't make the same mistake in the
future?


In any case, given this investigation and the EDID I'm going to say
that the panel you've added here is fine.

Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>

I've pushed your change to drm-misc-next:

a6325ad47bc8 drm/panel-edp: Add panel CSOT MNB601LS1-1

-Doug





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux