On 22/04/2024 10:24, Holger Assmann wrote: > Hello Krzysztof, > > also thanks for the feedback on this one. > > Am 19.04.24 um 15:39 schrieb Krzysztof Kozlowski: >> >> Please use subject prefixes matching the subsystem. You can get them for >> example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory >> your patch is touching. > > Short note: I did that prior submitting, but I did it directly for the > yaml-file and not for the directory - Those do not look the same > regarding their prefix scheme. No, if you run it per file or per directory, prefix is the same. Starts with regulator, doesn't it? > > I will change it for my v2 and use a subject like for the directory. regulator: dt-bindings: nxp,pca9450: add foo bar > > >> >>> --- >>> .../devicetree/bindings/regulator/nxp,pca9450-regulator.yaml | 3 +++ >>> 1 file changed, 3 insertions(+) >>> >>> diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml >>> index 3d469b8e97748..7cc2d6636cf52 100644 >>> --- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml >>> +++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml >>> @@ -35,6 +35,9 @@ properties: >>> interrupts: >>> maxItems: 1 >>> >>> + priority: >>> + $ref: /schemas/power/reset/restart-handler.yaml# >> >> You defined object, which is not explained in commit msg. This code does >> not look correct or it does not implement what you said. >> >> Please look at existing code - do you see anything like this? No, there >> is no such code and this should raise question. > > I am a bit lost on that one to be honest. > > The only other instances where a "priority" for restart handling is > described are "gpio-poweroff.yaml" and "syscon-reboot.yaml". These files > are dedicated documentation for the reset bindings, so I tried to > transfer the respective entry over for my commit. Where do you see such syntax? > > Do you suggest I should replace > > + priority: > + $ref: /schemas/power/reset/restart-handler.yaml# I don't understand what you want to express with such syntax. That's why I suggested you to look for existing examples. There is no such code as above, so you are the first one to add it. And then the obvious question: why are you doing things quite different than others? That's pretty often a hint that something is odd. > > with > > +allOf: > + - $ref: /schemas/power/reset/restart-handler.yaml# > > in order to properly include the context for the restart handling? > Running dt_binding_check does not indicate an issue with any of those two. Again, what do you want to achieve? > > >> >> You probably want to annotate that device is a restart handler? > > You mean by adding to the "description" part of the file? No. What do you want to achieve? Best regards, Krzysztof
