> + enet_clk_sel:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + items:
> + - items:
> + - description: phandle to the GPR syscon
> + - description: the offset of the GPR register
> + description:
> + Should be phandle/offset pair. The phandle to the syscon node which
> + encompases the GPR register, and the offset of the GPR register.
> +
net/nxp,dwmac-imx.yaml
intf_mode:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: phandle to the GPR syscon
- description: the offset of the GPR register
description:
Should be phandle/offset pair. The phandle to the syscon node which
encompases the GPR register, and the offset of the GPR register.
dma/fsl,imx-sdma.yaml
gpr:
$ref: /schemas/types.yaml#/definitions/phandle
description: The phandle to the General Purpose Register (GPR) node
memory-controllers/fsl/fsl,imx-weim.yaml
fsl,weim-cs-gpr:
$ref: /schemas/types.yaml#/definitions/phandle
description: |
Phandle to the system General Purpose Register controller that contains
WEIM CS GPR register, e.g. IOMUXC_GPR1 on i.MX6Q. IOMUXC_GPR1[11:0]
should be set up as one of the following 4 possible values depending on
the CS space configuration.
IOMUXC_GPR1[11:0] CS0 CS1 CS2 CS3
---------------------------------------------
05 128M 0M 0M 0M
033 64M 64M 0M 0M
0113 64M 32M 32M 0M
01111 32M 32M 32M 32M
In case that the property is absent, the reset value or what bootloader
sets up in IOMUXC_GPR1[11:0] will be used.
How about defining that the General Purpose Registers property is
once, rather than per device which needs access to it?
Andrew
