ADIN1300/1200 support software control over pin polarity for both LED_0 and LINK_ST pins. LED_0 polarity can be supported in led framework with led_polarity_set callback in a future patch-set. LINK_ST is a fixed-function output not suitable for led framework. Add bindings for specifying the polarity of LINK_ST pin in device-tree, and implement in adin phy driver. Signed-off-by: Josua Mayer <josua@xxxxxxxxxxxxx> --- Changes in v2: - removed led0 configuration since it can be supported through led framework - Link to v1: https://lore.kernel.org/r/20240419-adin-pin-polarity-v1-0-eaae8708db8d@xxxxxxxxxxxxx --- Josua Mayer (2): dt-bindings: net: adin: add property for link-status pin polarity net: phy: adin: add support for setting link-status-pin polarity .../devicetree/bindings/net/adi,adin.yaml | 9 +++++++ drivers/net/phy/adin.c | 29 ++++++++++++++++++++++ 2 files changed, 38 insertions(+) --- base-commit: 4cece764965020c22cff7665b18a012006359095 change-id: 20240419-adin-pin-polarity-30f7f85f6756 Sincerely, -- Josua Mayer <josua@xxxxxxxxxxxxx>
