[PATCH v21 9/9] usb: dwc3: qcom: Add multiport suspend/resume support for wrapper

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Power event IRQ is used for wakeup either when the controller is
SuperSpeed capable but is missing an SuperSpeed PHY interrupt, or when
the GIC is not capable of detecting DP/DM High-Speed PHY interrupts.

The Power event IRQ stat register indicates whether the High-Speed
phy entered and exited L2 successfully during suspend and resume.
Indicate the same for all ports of a multiport controller.

Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
Reviewed-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
---
 drivers/usb/dwc3/dwc3-qcom.c | 23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index b6f13bb14e2c..88fb6706a18d 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -36,7 +36,6 @@
 #define PIPE3_PHYSTATUS_SW			BIT(3)
 #define PIPE_UTMI_CLK_DIS			BIT(8)
 
-#define PWR_EVNT_IRQ_STAT_REG			0x58
 #define PWR_EVNT_LPM_IN_L2_MASK			BIT(4)
 #define PWR_EVNT_LPM_OUT_L2_MASK		BIT(5)
 
@@ -55,6 +54,13 @@
 /* Qualcomm SoCs with multiport support has up to 4 ports */
 #define DWC3_QCOM_MAX_PORTS	4
 
+static const u32 pwr_evnt_irq_stat_reg[DWC3_QCOM_MAX_PORTS] = {
+	0x58,
+	0x1dc,
+	0x228,
+	0x238,
+};
+
 struct dwc3_qcom_port {
 	int			qusb2_phy_irq;
 	int			dp_hs_phy_irq;
@@ -424,9 +430,11 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
 	if (qcom->is_suspended)
 		return 0;
 
-	val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
-	if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
-		dev_err(qcom->dev, "HS-PHY not in L2\n");
+	for (i = 0; i < qcom->num_ports; i++) {
+		val = readl(qcom->qscratch_base + pwr_evnt_irq_stat_reg[i]);
+		if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
+			dev_err(qcom->dev, "port-%d HS-PHY not in L2\n", i + 1);
+	}
 
 	for (i = qcom->num_clocks - 1; i >= 0; i--)
 		clk_disable_unprepare(qcom->clks[i]);
@@ -475,8 +483,11 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom, bool wakeup)
 		dev_warn(qcom->dev, "failed to enable interconnect: %d\n", ret);
 
 	/* Clear existing events from PHY related to L2 in/out */
-	dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG,
-			  PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
+	for (i = 0; i < qcom->num_ports; i++) {
+		dwc3_qcom_setbits(qcom->qscratch_base,
+				  pwr_evnt_irq_stat_reg[i],
+				  PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
+	}
 
 	qcom->is_suspended = false;
 
-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux