Re: [PATCH v3 0/7] ipq9574: Enable PCI-Express support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Kathiravan,

On 4/19/24 09:28, Kathiravan Thirumoorthy wrote:


On 4/15/2024 11:50 PM, Alexandru Gagniuc wrote:
There are four PCIe ports on IPQ9574, pcie0 thru pcie3. This series
addresses pcie2, which is a gen3x2 port. The board I have only uses
pcie2, and that's the only one enabled in this series.

I believe this makes sense as a monolithic series, as the individual
pieces are not that useful by themselves.

In v2, I've had some issues regarding the dt schema checks. For
transparency, I used the following test invocations to test v3:

       make dt_binding_check DT_SCHEMA_FILES=qcom,pcie.yaml:qcom,ipq8074-qmp-pcie-phy.yaml        make dtbs_check DT_SCHEMA_FILES=qcom,pcie.yaml:qcom,ipq8074-qmp-pcie-phy.yaml



Alexandru,

Thanks for your contributions to the Qualcomm IPQ chipsets.

I would like to inform you that we have also submitted the patches to enable the PCIe support on IPQ9574[1][2] and waiting for the ICC support[3] to land to enable the NOC clocks.

[1] https://lore.kernel.org/linux-arm-msm/20230519090219.15925-1-quic_devipriy@xxxxxxxxxxx/ [2] https://lore.kernel.org/linux-arm-msm/20230519085723.15601-1-quic_devipriy@xxxxxxxxxxx/ [3] https://lore.kernel.org/linux-arm-msm/20240418092305.2337429-1-quic_varada@xxxxxxxxxxx/

Please take a look at these patches as well.

I think I've seen [1] before -- I thought the series was abandoned. Since we have the dt-schema and applicability on mainline resolved here, do you want to use this series as the base for any new PCIe work?

Alex

Thanks,
Kathiravan T.


Changes since v2:
  - reworked resets in qcom,pcie.yaml to resolve dt schema errors
  - constrained "reg" in qcom,pcie.yaml
  - reworked min/max intems in qcom,ipq8074-qmp-pcie-phy.yaml
  - dropped msi-parent for pcie node, as it is handled by "msi" IRQ

Changes since v1:
  - updated new tables in phy-qcom-qmp-pcie.c to use lowercase hex numbers   - reorganized qcom,ipq8074-qmp-pcie-phy.yaml to use a single list of clocks
  - reorganized qcom,pcie.yaml to include clocks+resets per compatible
  - Renamed "pcie2_qmp_phy" label to "pcie2_phy"
  - moved "ranges" property of pcie@20000000 higher up

Alexandru Gagniuc (7):
   dt-bindings: clock: Add PCIe pipe related clocks for IPQ9574
   clk: qcom: gcc-ipq9574: Add PCIe pipe clocks
   dt-bindings: PCI: qcom: Add IPQ9574 PCIe controller
   PCI: qcom: Add support for IPQ9574
   dt-bindings: phy: qcom,ipq8074-qmp-pcie: add ipq9574 gen3x2 PHY
   phy: qcom-qmp-pcie: add support for ipq9574 gen3x2 PHY
   arm64: dts: qcom: ipq9574: add PCIe2 nodes

  .../devicetree/bindings/pci/qcom,pcie.yaml    |  35 +++++
  .../phy/qcom,ipq8074-qmp-pcie-phy.yaml        |  36 ++++-
  arch/arm64/boot/dts/qcom/ipq9574.dtsi         |  93 +++++++++++-
  drivers/clk/qcom/gcc-ipq9574.c                |  76 ++++++++++
  drivers/pci/controller/dwc/pcie-qcom.c        |  13 +-
  drivers/phy/qualcomm/phy-qcom-qmp-pcie.c      | 136 +++++++++++++++++-
  .../phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h   |  14 ++
  include/dt-bindings/clock/qcom,ipq9574-gcc.h  |   4 +
  8 files changed, 400 insertions(+), 7 deletions(-)





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux