Hello all, this patchset adds support for i.Core MX93 EDIMM 2.0 Starter Kit, a SoM + Evaluation Board combination from Engicam. The number of patch has diminished to 3, for I dropped the patch introducing a change in nxp,pca9450 binding which has been already submitted in regulator tree. (Dropped also regulator tree maintainers as recipients for they aren't anymore involved in this patchset) Thanks in advance, fabio --- v2 ---> v3: - fixed dtschema warnings - added Acked/Reviewed-by tags - removed regulator-always-on on bt_reg_on - fixed clock rate assignment on sgtl5000 node - added wdog_b-warm-reset; property in pmic - fixed indentation issue v1 ---> v2: - dropped patch updating nxp,pca9450 binding - fixed indentation issue - fixed missing space issue - improved naming of regulator nodes - removed unneeded include - fixed email recipients Fabio Aiuto (3): dt-bindings: arm: fsl: add Engicam i.Core MX93 EDIMM 2.0 Starter Kit arm64: dts: imx93: add Engicam i.Core MX93 SoM arm64: dts: imx93: Add Engicam i.Core MX93 EDIMM 2.0 Starter Kit .../devicetree/bindings/arm/fsl.yaml | 7 + arch/arm64/boot/dts/freescale/Makefile | 1 + .../dts/freescale/imx93-icore-mx93-edimm2.dts | 347 ++++++++++++++++++ .../boot/dts/freescale/imx93-icore-mx93.dtsi | 271 ++++++++++++++ 4 files changed, 626 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx93-icore-mx93-edimm2.dts create mode 100644 arch/arm64/boot/dts/freescale/imx93-icore-mx93.dtsi -- 2.34.1