On 18/04/2024 10:15, lvzhaoxiong wrote: > Create a new dt-scheam for the kd101ne3-40ti. There is another thread like this, which is confusing. Please version your patches. patman solves it. b4 as well. Read the guidelines provided to you by Google. > > Signed-off-by: lvzhaoxiong <lvzhaoxiong@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> Same comment as for all your other patches: please use full name. > --- > .../panel/kingdisplay,kd101ne3-40ti.yaml | 63 +++++++++++++++++++ > 1 file changed, 63 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/kingdisplay,kd101ne3-40ti.yaml > > diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd101ne3-40ti.yaml b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd101ne3-40ti.yaml > new file mode 100644 > index 000000000000..dc79a49eea3b > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd101ne3-40ti.yaml > @@ -0,0 +1,63 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/panel/kingdisplay,kd101ne3-40ti.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: King Display KD035G6-40TI based MIPI-DSI panels > + > +description: | > + -This binding is for display panels using an JD9365DA controller > + > +maintainers: > + - Zhaoxiong Lv <lvzhaoxiong@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> > + > +allOf: > + - $ref: panel-common.yaml# > + > +properties: > + compatible: > + const: kingdisplay,kd101ne3-40ti > + > + backlight: true > + port: true Drop both > + pp3300-supply: true > + reg: true > + enable-gpios: true > + rotation: true Drop these three. panel-common defines them. > + > +required: > + - compatible > + - reg > + - enable-gpios > + - pp3300-supply > + - backlight > + - port These can stay. > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + dsi { > + #address-cells = <1>; > + #size-cells = <0>; > + panel: panel@0 { > + compatible = "kingdisplay,kd101ne3-40ti"; > + reg = <0>; > + enable-gpios = <&pio 98 0>; You included the header, so use it. Best regards, Krzysztof
