Add eQEP DT nodes 0-2 for AM642 SoC.
Since external hardware was needed to test eQEP, the DT nodes
for eQEP were not included in the introductory commit. Now that
eQEP has been validated, add nodes to k3-am64-main.dtsi.
Fixes: 8abae9389bdb ("arm64: dts: ti: Add support for AM642 SoC")
Signed-off-by: Judith Mendez <jm@xxxxxx>
---
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 30 ++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index 6f9aa5e02138f..e7d31d7e0426c 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -1171,6 +1171,36 @@ ecap2: pwm@23120000 {
status = "disabled";
};
+ eqep0: counter@23200000 {
+ compatible = "ti,am3352-eqep";
+ reg = <0x00 0x23200000 0x00 0x100>;
+ power-domains = <&k3_pds 59 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 59 0>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 116 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
+
+ eqep1: counter@23210000 {
+ compatible = "ti,am3352-eqep";
+ reg = <0x00 0x23210000 0x00 0x100>;
+ power-domains = <&k3_pds 60 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 60 0>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 117 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
+
+ eqep2: counter@23220000 {
+ compatible = "ti,am3352-eqep";
+ reg = <0x00 0x23220000 0x00 0x100>;
+ power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 62 0>;
+ clock-names = "fck";
+ interrupts = <GIC_SPI 118 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
+
main_rti0: watchdog@e000000 {
compatible = "ti,j7-rti-wdt";
reg = <0x00 0xe000000 0x00 0x100>;
--
2.43.2
