Re: [PATCH V2 RESEND 6/6] arm64: dts: qcom: sm8650: Add video and camera clock controllers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 4/5/2024 1:14 PM, Dmitry Baryshkov wrote:
On Fri, 5 Apr 2024 at 09:01, Jagadeesh Kona <quic_jkona@xxxxxxxxxxx> wrote:



On 4/4/2024 9:35 PM, Dmitry Baryshkov wrote:
On Thu, 4 Apr 2024 at 13:06, Jagadeesh Kona <quic_jkona@xxxxxxxxxxx> wrote:



On 4/4/2024 11:00 AM, Dmitry Baryshkov wrote:
On Thu, 4 Apr 2024 at 08:13, Jagadeesh Kona <quic_jkona@xxxxxxxxxxx> wrote:



On 4/3/2024 9:24 PM, Dmitry Baryshkov wrote:
On Wed, 3 Apr 2024 at 10:16, Jagadeesh Kona <quic_jkona@xxxxxxxxxxx> wrote:



On 3/25/2024 11:38 AM, Jagadeesh Kona wrote:


On 3/21/2024 6:43 PM, Dmitry Baryshkov wrote:
On Thu, 21 Mar 2024 at 11:27, Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
wrote:

Add device nodes for video and camera clock controllers on Qualcomm
SM8650 platform.

Signed-off-by: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
---
      arch/arm64/boot/dts/qcom/sm8650.dtsi | 28 ++++++++++++++++++++++++++++
      1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi
b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index 32c0a7b9aded..d862aa6be824 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -4,6 +4,8 @@
       */

      #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8450-videocc.h>
+#include <dt-bindings/clock/qcom,sm8650-camcc.h>
      #include <dt-bindings/clock/qcom,sm8650-dispcc.h>
      #include <dt-bindings/clock/qcom,sm8650-gcc.h>
      #include <dt-bindings/clock/qcom,sm8650-gpucc.h>
@@ -3110,6 +3112,32 @@ opp-202000000 {
                             };
                     };

+               videocc: clock-controller@aaf0000 {
+                       compatible = "qcom,sm8650-videocc";
+                       reg = <0 0x0aaf0000 0 0x10000>;
+                       clocks = <&bi_tcxo_div2>,
+                                <&gcc GCC_VIDEO_AHB_CLK>;
+                       power-domains = <&rpmhpd RPMHPD_MMCX>;
+                       required-opps = <&rpmhpd_opp_low_svs>;

The required-opps should no longer be necessary.


Sure, will check and remove this if not required.


I checked further on this and without required-opps, if there is no vote
on the power-domain & its peer from any other consumers, when runtime
get is called on device, it enables the power domain just at the minimum
non-zero level. But in some cases, the minimum non-zero level of
power-domain could be just retention and is not sufficient for clock
controller to operate, hence required-opps property is needed to specify
the minimum level required on power-domain for this clock controller.

In which cases? If it ends up with the retention vote, it is a bug
which must be fixed.


The minimum non-zero level(configured from bootloaders) of MMCX is
retention on few chipsets but it can vary across the chipsets. Hence to
be on safer side from our end, it is good to have required-opps in DT to
specify the minimum level required for this clock controller.

We are discussing sm8650, not some abstract chipset. Does it list
retention or low_svs as a minimal level for MMCX?


Actually, the minimum level for MMCX is external to the clock
controllers.

Yes, it comes from cmd-db

   But the clock controller requires MMCX to be atleast at
lowsvs for it to be functional.

Correct

Hence we need to keep required-opps to
ensure the same without relying on the actual minimum level for MMCX.

And this is not correct. There is no need for the DT to be redundant.
I plan to send patches removing the existing required-opps when they
are not required.


In my opinion, it is better not to remove the required-opps for the existing targets atleast since it may lead to some random clock issues if cmd-db minimum level is lower than the HW recommended voltage level clock controller requires.

I agree this is not required if cmd-db minimum level is already at
lowsvs. But since MMCX running at lowsvs is a mandatory requirement for
clock controller to operate, I believe it is good to have required-opps
to ensure we meet this requirement in all cases, rather than relying on
the cmd-db minimum level which we have no control over.

IIf we follow this logic, we should throw cmd-db away and hardcode all
those values in the RPMh drivers.

We have cmd-db. If it is correct, there is no need to duplicate it. If
it is incorrect, it is a bug that should be fixed or worked around.


Sure will check and remove required-opps property for SM8650.

Thanks,
Jagadeesh





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux