Re: [PATCH v6 3/5] iio: adc: ad7192: Add aincom supply

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Apr 17, 2024 at 8:01 PM Alisa-Dariana Roman
<alisadariana@xxxxxxxxx> wrote:
>
> AINCOM should actually be a supply. AINx inputs are referenced to AINCOM
> in pseduo-differential operation mode. AINCOM voltage represets the

pseudo

> offset of corresponding channels.

...

> +               case IIO_VOLTAGE:
> +                       if (st->aincom_mv && !chan->differential)
> +                               *val += DIV_ROUND_CLOSEST_ULL((u64)st->aincom_mv * 1000000000,

It's quite easy to make a mistake in this long constant. Can you use
an appropriate one from units.h?

> +                                                             st->scale_avail[gain][1]);
> +                       return IIO_VAL_INT;

...

> +       aincom = devm_regulator_get_optional(&spi->dev, "aincom");
> +       if (!IS_ERR(aincom)) {

Why not a positive condition?

> +               ret = regulator_enable(aincom);
> +               if (ret) {

> +                       dev_err(&spi->dev, "Failed to enable specified AINCOM supply\n");

return dev_err_probe();

> +                       return ret;
> +               }
> +
> +               ret = devm_add_action_or_reset(&spi->dev, ad7192_reg_disable, aincom);
> +               if (ret)
> +                       return ret;
> +
> +               ret = regulator_get_voltage(aincom);
> +               if (ret < 0)
> +                       return dev_err_probe(&spi->dev, ret,
> +                                            "Device tree error, AINCOM voltage undefined\n");
> +               st->aincom_mv = ret / 1000;
> +       } else {
> +               st->aincom_mv = 0;
> +       }

...

> @@ -1113,6 +1145,7 @@ static int ad7192_probe(struct spi_device *spi)
>         st->int_vref_mv = ret / 1000;
>
>         st->chip_info = spi_get_device_match_data(spi);
> +
>         indio_dev->name = st->chip_info->name;
>         indio_dev->modes = INDIO_DIRECT_MODE;
>         indio_dev->channels = st->chip_info->channels;

Stray change.

-- 
With Best Regards,
Andy Shevchenko





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux