Hello all, this patchset adds support for i.Core MX93 EDIMM 2.0 Starter Kit, a SoM + Evaluation Board combination from Engicam. If I'm not wrong the change I propose on patch 2 has been already queued up in regulator subsystem, anyway I put it here to satisfy requirements for dt-bindings patch submission (if I don't do that checkpatch complains about that). Thanks in advance, fabio Fabio Aiuto (4): dt-bindings: arm: fsl: add Engicam i.Core MX93 EDIMM 2.0 Starter Kit regulator: dt-bindings: pca9450: add pca9451a support arm64: dts: imx93: add Engicam i.Core MX93 SoM arm64: dts: imx93: Add Engicam i.Core MX93 EDIMM 2.0 Starter Kit .../devicetree/bindings/arm/fsl.yaml | 7 + .../regulator/nxp,pca9450-regulator.yaml | 1 + arch/arm64/boot/dts/freescale/Makefile | 1 + .../dts/freescale/imx93-icore-mx93-edimm2.dts | 356 ++++++++++++++++++ .../boot/dts/freescale/imx93-icore-mx93.dtsi | 271 +++++++++++++ 5 files changed, 636 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx93-icore-mx93-edimm2.dts create mode 100644 arch/arm64/boot/dts/freescale/imx93-icore-mx93.dtsi -- 2.34.1