On 11/04/2024 16:34, Théo Lebrun wrote:
> Hello,
>
> On Thu Apr 11, 2024 at 8:15 AM CEST, Krzysztof Kozlowski wrote:
>> On 10/04/2024 19:12, Théo Lebrun wrote:
>>> The OLB ("Other Logic Block") is a syscon region hosting clock, reset
>>> and pin controllers. It contains registers such as I2C speed mode that
>>> need to be accessible by other nodes.
>>>
>>> Signed-off-by: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
>>> ---
>>> arch/mips/boot/dts/mobileye/eyeq5.dtsi | 8 ++++++++
>>> 1 file changed, 8 insertions(+)
>>>
>>> diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
>>> index 6cc5980e2fa1..e82d2a57f6da 100644
>>> --- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi
>>> +++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
>>> @@ -100,6 +100,14 @@ uart2: serial@a00000 {
>>> clock-names = "uartclk", "apb_pclk";
>>> };
>>>
>>> + olb: system-controller@e00000 {
>>> + compatible = "mobileye,eyeq5-olb", "syscon", "simple-mfd";
>>> + reg = <0 0xe00000 0x0 0x400>;
>>> + ranges = <0x0 0x0 0xe00000 0x400>;
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>
>> Do not add incomplete node. ranges, address/size-cells are incorrect in
>> this context and you will have warnings.
>>
>> Add complete node, so these properties make sense.
>
> I'll squash all four commits into one. For reference, commits are:
>
> - MIPS: mobileye: eyeq5: add OLB syscon node
> - MIPS: mobileye: eyeq5: use OLB clocks controller node
> - MIPS: mobileye: eyeq5: add OLB reset controller node
> - MIPS: mobileye: eyeq5: add pinctrl node & pinmux function nodes
>
> This means two things: (1) it won't be partially applicable and (2) it
Why?
> will make one big commit adding pins and editing clocks.
It never was partially applicable. Causing warnings does not make things
partially applicable. If node is too big, although I personally do not
agree, it's quite moderate size chunk, then sure, split pinctrl groups
or pinctrl node to additional patch.
Best regards,
Krzysztof
