Re: [PATCH v8 3/3] input: pm8xxx-vibrator: add new SPMI vibrator support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Konrad,


On 4/11/2024 2:10 AM, Konrad Dybcio wrote:


-#define VIB_MAX_LEVEL_mV    (3100)
-#define VIB_MIN_LEVEL_mV    (1200)
-#define VIB_MAX_LEVELS        (VIB_MAX_LEVEL_mV - VIB_MIN_LEVEL_mV)
+#define VIB_MAX_LEVEL_mV(vib)    (vib->drv2_addr ? (3544) : (3100))

You shouldn't need the additional inside parentheses

Also, is this really a good discriminator for the voltage ranges? Do *all*
PMIC vibrators with a drv2_addr operate within this range? If not, consider
a struct field here

Currently, yes, all PMIC vibrators with a drv2_addr (PMI632, PM7250B, PM7325B, PM7550BA) operate within the same range because they are the same type.


+#define VIB_MIN_LEVEL_mV(vib)    (vib->drv2_addr ? (1504) : (1200))
+#define VIB_MAX_LEVELS(vib)    (VIB_MAX_LEVEL_mV(vib) - VIB_MIN_LEVEL_mV(vib))

If the ranges are supposed to be inclusive, this is off-by-one. But looking
at the driver, it seems like MIN_LEVEL may be "off"? I'm not sure though.

Either way, this would be a separate fix.
[...]
The voltage range [1504, 3544] for the new SPMI vibrator is inclusive. I checked the voltage range [1200 3100] for PM8916 SPMI vibrator is also inclusive. I couldn't find any document to confirm if the SSBI vibrator but I assume it is the same as PM8916. I will make change before the series to address it.

Thanks for reviewing the changes!

Fenglin




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux