On 09/04/2024 15:42, Alexandre Mergnat wrote: > Add MT8365 audio codec bindings to set required > and optional voltage properties between the codec and the board. > The properties are: > - phandle of the requiered power supply. typo > - Setup of microphone bias voltage. > - Setup of the speaker pin pull-down. > > Signed-off-by: Alexandre Mergnat <amergnat@xxxxxxxxxxxx> > --- > .../devicetree/bindings/sound/mt6357.yaml | 54 ++++++++++++++++++++++ Filename using compatible syntax, so missing vendor prefix. > 1 file changed, 54 insertions(+) > > diff --git a/Documentation/devicetree/bindings/sound/mt6357.yaml b/Documentation/devicetree/bindings/sound/mt6357.yaml > new file mode 100644 > index 000000000000..381cb71b959f > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/mt6357.yaml > @@ -0,0 +1,54 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/sound/mt6357.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Mediatek MT6357 Codec > + > +maintainers: > + - Alexandre Mergnat <amergnat@xxxxxxxxxxxx> > + > +description: | Do not need '|' unless you need to preserve formatting. > + This is the required and optional voltage properties for this subdevice. > + The communication between MT6357 and SoC is through Mediatek PMIC wrapper. > + For more detail, please visit Mediatek PMIC wrapper documentation. > + Must be a child node of PMIC wrapper. Why? > + > +properties: > + Drop blank line > + mediatek,hp-pull-down: > + description: > + Earphone driver positive output stage short to > + the audio reference ground. > + type: boolean > + > + mediatek,micbias0-microvolt: > + description: Selects MIC Bias 0 output voltage. > + enum: [1700000, 1800000, 1900000, 2000000, > + 2100000, 2500000, 2600000, 2700000] > + default: 1700000 > + > + mediatek,micbias1-microvolt: > + description: Selects MIC Bias 1 output voltage. > + enum: [1700000, 1800000, 1900000, 2000000, > + 2100000, 2500000, 2600000, 2700000] > + default: 1700000 > + > + mediatek,vaud28-supply: > + description: 2.8 volt supply phandle for the audio codec Supplies go without vendor prefixes. > + > +required: > + - mediatek,vaud28-supply That's basically no-op schema. I do not understand what you are trying to achieve here. > + > +additionalProperties: false > + > +examples: > + - | > + codec { > + mediatek,micbias0-microvolt = <1900000>; > + mediatek,micbias1-microvolt = <1700000>; > + mediatek,vaud28-supply = <&mt6357_vaud28_reg>; Sorry, this does not work. Change voltage to 1111111 and check the results. Best regards, Krzysztof
