Hi Inochi
On 4/9/24 at 14:27, Inochi Amaoto wrote:
On Tue, Apr 09, 2024 at 01:13:32PM +0100, Conor Dooley wrote:
On Tue, Apr 09, 2024 at 03:17:35PM +0800, Inochi Amaoto wrote:
On Tue, Apr 09, 2024 at 08:45:04AM +0200, michael.opdenacker@xxxxxxxxxxx wrote:
From: Michael Opdenacker <michael.opdenacker@xxxxxxxxxxx>
This adds initial support for the Milk-V Duo S board
(https://milkv.io/duo-s), enabling the serial port and
read-only SD card support, allowing to boot Linux to the
command line.
Hi Michael,
I think your patch losts the board binding and have wrong compatiable.
Also, the SD can have rw support with proper property. See link [1]
(need 'disable-wp').
[1] doesn't go anywhere useful.
This is my fault, I copied the wrong url. The right patch is
https://lore.kernel.org/r/20240217144826.3944-1-jszhang@xxxxxxxxxx.
No problem, I found out.
I confirm that using the "disable-wp;" property does the trick to make
the MMC writable.
However, it wasn't mentioned in the above URL...
By the way, do I really need those under &sdhci0?
+ bus-width = <4>; + no-1-8-v; + no-mmc; + no-sdio;
My board looks happy so far without them ;-)
Thanks again for your help
Cheers
Michael.
--
Michael Opdenacker, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
