RE: [PATCH v3 1/9] drm: xlnx: zynqmp_dpsub: Set layer mode during creation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
> Sent: Friday, April 5, 2024 5:31 AM
> To: Klymenko, Anatoliy <Anatoliy.Klymenko@xxxxxxx>
> Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-
> media@xxxxxxxxxxxxxxx; Laurent Pinchart
> <laurent.pinchart@xxxxxxxxxxxxxxxx>; Maarten Lankhorst
> <maarten.lankhorst@xxxxxxxxxxxxxxx>; Maxime Ripard
> <mripard@xxxxxxxxxx>; Thomas Zimmermann <tzimmermann@xxxxxxx>;
> David Airlie <airlied@xxxxxxxxx>; Daniel Vetter <daniel@xxxxxxxx>;
> Simek, Michal <michal.simek@xxxxxxx>; Andrzej Hajda
> <andrzej.hajda@xxxxxxxxx>; Neil Armstrong
> <neil.armstrong@xxxxxxxxxx>; Robert Foss <rfoss@xxxxxxxxxx>; Jonas
> Karlman <jonas@xxxxxxxxx>; Jernej Skrabec
> <jernej.skrabec@xxxxxxxxx>; Rob Herring <robh+dt@xxxxxxxxxx>;
> Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>; Conor Dooley
> <conor+dt@xxxxxxxxxx>; Mauro Carvalho Chehab
> <mchehab@xxxxxxxxxx>
> Subject: Re: [PATCH v3 1/9] drm: xlnx: zynqmp_dpsub: Set layer mode
> during creation
> 
> Caution: This message originated from an External Source. Use proper
> caution when opening attachments, clicking links, or responding.
> 
> 
> On 21/03/2024 22:43, Anatoliy Klymenko wrote:
> > Set layer mode of operation (live or dma-based) during layer creation.
> >
> > Each DPSUB layer mode of operation is defined by corresponding DT
> node port
> > connection, so it is possible to assign it during layer object creation.
> > Previously it was set in layer enable functions, although it is too late
> > as setting layer format depends on layer mode, and should be done
> before
> > given layer enabled.
> >
> > Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@xxxxxxx>
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > ---
> >   drivers/gpu/drm/xlnx/zynqmp_disp.c | 20 ++++++++++++++++----
> >   drivers/gpu/drm/xlnx/zynqmp_disp.h | 13 +------------
> >   drivers/gpu/drm/xlnx/zynqmp_dp.c   |  2 +-
> >   drivers/gpu/drm/xlnx/zynqmp_kms.c  |  2 +-
> >   4 files changed, 19 insertions(+), 18 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/xlnx/zynqmp_disp.c
> b/drivers/gpu/drm/xlnx/zynqmp_disp.c
> > index 8a39b3accce5..e6d26ef60e89 100644
> > --- a/drivers/gpu/drm/xlnx/zynqmp_disp.c
> > +++ b/drivers/gpu/drm/xlnx/zynqmp_disp.c
> > @@ -64,6 +64,16 @@
> >
> >   #define ZYNQMP_DISP_MAX_NUM_SUB_PLANES                      3
> >
> > +/**
> > + * enum zynqmp_dpsub_layer_mode - Layer mode
> > + * @ZYNQMP_DPSUB_LAYER_NONLIVE: non-live (memory) mode
> > + * @ZYNQMP_DPSUB_LAYER_LIVE: live (stream) mode
> > + */
> > +enum zynqmp_dpsub_layer_mode {
> > +     ZYNQMP_DPSUB_LAYER_NONLIVE,
> > +     ZYNQMP_DPSUB_LAYER_LIVE,
> > +};
> > +
> >   /**
> >    * struct zynqmp_disp_format - Display subsystem format information
> >    * @drm_fmt: DRM format (4CC)
> > @@ -902,15 +912,12 @@ u32
> *zynqmp_disp_layer_drm_formats(struct zynqmp_disp_layer *layer,
> >   /**
> >    * zynqmp_disp_layer_enable - Enable a layer
> >    * @layer: The layer
> > - * @mode: Operating mode of layer
> >    *
> >    * Enable the @layer in the audio/video buffer manager and the
> blender. DMA
> >    * channels are started separately by zynqmp_disp_layer_update().
> >    */
> > -void zynqmp_disp_layer_enable(struct zynqmp_disp_layer *layer,
> > -                           enum zynqmp_dpsub_layer_mode mode)
> > +void zynqmp_disp_layer_enable(struct zynqmp_disp_layer *layer)
> >   {
> > -     layer->mode = mode;
> >       zynqmp_disp_avbuf_enable_video(layer->disp, layer);
> >       zynqmp_disp_blend_layer_enable(layer->disp, layer);
> >   }
> > @@ -1134,6 +1141,11 @@ static int zynqmp_disp_create_layers(struct
> zynqmp_disp *disp)
> >               layer->id = i;
> >               layer->disp = disp;
> >               layer->info = &layer_info[i];
> > +             /* For now assume dpsub works in either live or non-live
> mode for both layers.
> > +              * Hybrid mode is not supported yet.
> > +              */
> 
> This comment style is not according to the style guide, and in fact you
> fix it in the patch 4. So please fix it here instead.
> 

Thanks for catching it.

>   Tomi
> 
> > +             layer->mode = disp->dpsub->dma_enabled ?
> ZYNQMP_DPSUB_LAYER_NONLIVE
> > +                                                    : ZYNQMP_DPSUB_LAYER_LIVE;
> >
> >               ret = zynqmp_disp_layer_request_dma(disp, layer);
> >               if (ret)
> > diff --git a/drivers/gpu/drm/xlnx/zynqmp_disp.h
> b/drivers/gpu/drm/xlnx/zynqmp_disp.h
> > index 123cffac08be..9b8b202224d9 100644
> > --- a/drivers/gpu/drm/xlnx/zynqmp_disp.h
> > +++ b/drivers/gpu/drm/xlnx/zynqmp_disp.h
> > @@ -42,16 +42,6 @@ enum zynqmp_dpsub_layer_id {
> >       ZYNQMP_DPSUB_LAYER_GFX,
> >   };
> >
> > -/**
> > - * enum zynqmp_dpsub_layer_mode - Layer mode
> > - * @ZYNQMP_DPSUB_LAYER_NONLIVE: non-live (memory) mode
> > - * @ZYNQMP_DPSUB_LAYER_LIVE: live (stream) mode
> > - */
> > -enum zynqmp_dpsub_layer_mode {
> > -     ZYNQMP_DPSUB_LAYER_NONLIVE,
> > -     ZYNQMP_DPSUB_LAYER_LIVE,
> > -};
> > -
> >   void zynqmp_disp_enable(struct zynqmp_disp *disp);
> >   void zynqmp_disp_disable(struct zynqmp_disp *disp);
> >   int zynqmp_disp_setup_clock(struct zynqmp_disp *disp,
> > @@ -62,8 +52,7 @@ void zynqmp_disp_blend_set_global_alpha(struct
> zynqmp_disp *disp,
> >
> >   u32 *zynqmp_disp_layer_drm_formats(struct zynqmp_disp_layer
> *layer,
> >                                  unsigned int *num_formats);
> > -void zynqmp_disp_layer_enable(struct zynqmp_disp_layer *layer,
> > -                           enum zynqmp_dpsub_layer_mode mode);
> > +void zynqmp_disp_layer_enable(struct zynqmp_disp_layer *layer);
> >   void zynqmp_disp_layer_disable(struct zynqmp_disp_layer *layer);
> >   void zynqmp_disp_layer_set_format(struct zynqmp_disp_layer *layer,
> >                                 const struct drm_format_info *info);
> > diff --git a/drivers/gpu/drm/xlnx/zynqmp_dp.c
> b/drivers/gpu/drm/xlnx/zynqmp_dp.c
> > index 1846c4971fd8..04b6bcac3b07 100644
> > --- a/drivers/gpu/drm/xlnx/zynqmp_dp.c
> > +++ b/drivers/gpu/drm/xlnx/zynqmp_dp.c
> > @@ -1295,7 +1295,7 @@ static void zynqmp_dp_disp_enable(struct
> zynqmp_dp *dp,
> >       /* TODO: Make the format configurable. */
> >       info = drm_format_info(DRM_FORMAT_YUV422);
> >       zynqmp_disp_layer_set_format(layer, info);
> > -     zynqmp_disp_layer_enable(layer, ZYNQMP_DPSUB_LAYER_LIVE);
> > +     zynqmp_disp_layer_enable(layer);
> >
> >       if (layer_id == ZYNQMP_DPSUB_LAYER_GFX)
> >               zynqmp_disp_blend_set_global_alpha(dp->dpsub->disp, true,
> 255);
> > diff --git a/drivers/gpu/drm/xlnx/zynqmp_kms.c
> b/drivers/gpu/drm/xlnx/zynqmp_kms.c
> > index db3bb4afbfc4..43bf416b33d5 100644
> > --- a/drivers/gpu/drm/xlnx/zynqmp_kms.c
> > +++ b/drivers/gpu/drm/xlnx/zynqmp_kms.c
> > @@ -122,7 +122,7 @@ static void
> zynqmp_dpsub_plane_atomic_update(struct drm_plane *plane,
> >
> >       /* Enable or re-enable the plane if the format has changed. */
> >       if (format_changed)
> > -             zynqmp_disp_layer_enable(layer,
> ZYNQMP_DPSUB_LAYER_NONLIVE);
> > +             zynqmp_disp_layer_enable(layer);
> >   }
> >
> >   static const struct drm_plane_helper_funcs
> zynqmp_dpsub_plane_helper_funcs = {
> >





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux