The binding dictates using 3 pwm-cells. Adhere to that. This fixes the following dtbs_check warnings: arch/arm/boot/dts/nxp/imx/imx6sx-sdb-reva.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# arch/arm/boot/dts/nxp/imx/imx6sx-sdb-sai.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# arch/arm/boot/dts/nxp/imx/imx6sx-sdb-mqs.dtb: pwm@2088000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# There is no need for an explicit status = "okay" in the pwm node as the soc dtsi doesn't disable this device. Drop this property, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> --- arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi index c6e85e4a0883..0c6ed5f988c2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi @@ -23,7 +23,7 @@ memory@80000000 { backlight_display: backlight-display { compatible = "pwm-backlight"; - pwms = <&pwm3 0 5000000>; + pwms = <&pwm3 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; }; @@ -295,10 +295,8 @@ display_out: endpoint { }; &pwm3 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; - status = "okay"; }; &snvs_poweroff { -- 2.43.0
