The binding dictates using 3 pwm-cells. Adhere to that. This fixes the following dtbs_check warning: arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dtb: pwm@2084000: #pwm-cells:0:0: 3 was expected from schema : http://devicetree.org/schemas/pwm/imx-pwm.yaml# Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> --- arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts index 2290c1237634..0225a621ec7a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-var-dt6customboard.dts @@ -18,7 +18,7 @@ / { backlight_lvds: backlight { compatible = "pwm-backlight"; - pwms = <&pwm2 0 50000>; + pwms = <&pwm2 0 50000 0>; brightness-levels = <0 4 8 16 32 64 128 248>; default-brightness-level = <7>; status = "okay"; @@ -203,7 +203,6 @@ lvds1_out: endpoint { }; &pwm2 { - #pwm-cells = <2>; status = "okay"; }; -- 2.43.0