On Wednesday, February 11, 2015 01:24:37 PM Boris Brezillon wrote:
> Hi Mark,
>
> On Wed, 11 Feb 2015 11:11:06 +0000
> Mark Rutland <mark.rutland@xxxxxxx> wrote:
>
> > On Wed, Feb 11, 2015 at 08:53:39AM +0000, Boris Brezillon wrote:
> > > Hi Mark,
> > >
> > > On Tue, 10 Feb 2015 20:48:36 +0000
> > > Mark Rutland <mark.rutland@xxxxxxx> wrote:
> > >
> > > > On Tue, Feb 10, 2015 at 03:52:01PM +0000, Boris Brezillon wrote:
> > > > > Hi Mark,
> > > > >
> > > > > On Tue, 10 Feb 2015 15:36:28 +0000
> > > > > Mark Rutland <mark.rutland@xxxxxxx> wrote:
> > > > >
> > > > > > Hi Boris,
> > > > > >
> > > > > > On Thu, Jan 29, 2015 at 10:33:38AM +0000, Boris Brezillon wrote:
> > > > > > > Add documentation for the virtual irq demuxer.
> > > > > > >
> > > > > > > Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
> > > > > > > Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
> > > > > > > ---
> > > > > > > .../bindings/interrupt-controller/dumb-demux.txt | 41 ++++++++++++++++++++++
> > > > > > > 1 file changed, 41 insertions(+)
> > > > > > > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/dumb-demux.txt
> > > > > > >
> > > > > > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/dumb-demux.txt b/Documentation/devicetree/bindings/interrupt-controller/dumb-demux.txt
> > > > > > > new file mode 100644
> > > > > > > index 0000000..b9a7830
> > > > > > > --- /dev/null
> > > > > > > +++ b/Documentation/devicetree/bindings/interrupt-controller/dumb-demux.txt
> > > > > > > @@ -0,0 +1,41 @@
> > > > > > > +* Virtual Interrupt Demultiplexer
> > > > > > > +
> > > > > > > +This virtual demultiplexer simply forward all incoming interrupts to its
> > > > > > > +enabled/unmasked children.
> > > > > > > +It is only intended to be used by hardware that do not provide a proper way
> > > > > > > +to demultiplex a source interrupt, and thus have to wake all their children
> > > > > > > +up so that they can possibly handle the interrupt (if needed).
> > > > > > > +This can be seen as an alternative to shared interrupts when at least one
> > > > > > > +of the interrupt children is a timer (and require the irq to stay enabled
> > > > > > > +on suspend) while others are not. This will prevent calling irq handlers of
> > > > > > > +non timer devices while they are suspended.
> > > > > >
> > > > > > This sounds like a DT-workaround for a Linux implementation problem, and
> > > > > > I don't think this the right way to solve your problem.
> > > > >
> > > > > I understand your concern, but why are you answering while I asked for
> > > > > DT maintainers reviews for several days (if not several weeks).
> > > > >
> > > > > >
> > > > > > Why does this have to be in DT at all? Why can we not fix the core to
> > > > > > handle these details?
> > > > >
> > > > > We already discussed that with Rob and Thomas, and hiding such a
> > > > > demuxer chip is not an easy task.
> > > > > I'm open to any suggestion to do that, though I'd like you (I mean DT
> > > > > guys) to provide a working implementation (or at least a viable concept)
> > > > > that would silently demultiplex an irq.
> > > > >
> > > > > >
> > > > > > I am very much not keen on this binding.
> > > > >
> > > > > Yes, but do you have anything else to propose.
> > > > > We're experiencing this warning for 2 releases now, and this is time to
> > > > > find a solution (even if it's not a perfect one).
> > > >
> > > > Thoughts on the patch below?
> > >
> > > That's pretty much what I proposed in my first attempt to solve this
> > > problem [1] (except for a few things commented below).
> > > Anyway, Thomas suggested to go for the "dumb/virt irq demultiplexer"
> > > approach instead.
> >
> > There is one fundamental difference in that this patch does not require
> > drivers to be updated (the new flag is only used internally). Which
> > avoids having to patch every single driver that could possibly be used
> > in combination with one wanting interrupts during suspend.
>
> Actually, that was one of the requirements expressed by Thomas (Thomas,
> correct me if I'm wrong).
> The point was to force shared irq users to explicitly specify that they
> are mixing !IRQF_NO_SUSPEND and IRQF_NO_SUSPEND because they have no
> other choice.
>
> With your patch, there's no way to inform users that they are
> erroneously setting the IRQF_NO_SUSPEND flag on one of their shared
> interrupt.
>
> >
> > Any used which did not explicitly request with IRQF_NO_SUSPEND will not
> > receive interrupts during suspend.
> >
> > [...]
> >
> > > > +static irqreturn_t __handle_irq_event_percpu(unsigned int irq, struct irqaction *action)
> > > > +{
> > > > + /*
> > > > + * During suspend we must not call potentially unsafe irq handlers.
> > > > + * See suspend_suspendable_actions.
> > > > + */
> > > > + if (unlikely(action->flags & IRQF_NO_ACTION))
> > > > + return IRQ_NONE;
> > >
> > > Thomas was trying to avoid any new conditional code in the interrupt
> > > handling path, that's why I added a suspended_action list in my
> > > proposal.
> > > Even if your 'unlikely' statement make things better I'm pretty sure it
> > > adds some latency.
> >
> > I can see that we don't want to add more code here to keep things
> > clean/pure, but I find it hard to believe that a single bit test and
> > branch (for data that should be hot in the cache) are going to add
> > measurable latency to a path that does pointer chasing to get to the
> > irqaction in the first place. I could be wrong though, and I'm happy to
> > benchmark.
>
> Again, I don't have enough experience to say this is (or isn't)
> impacting irq handling latency, I'm just reporting what Thomas told me.
>
> >
> > It would be possible to go for your list shuffling approach here while
> > still keeping the flag internal and all the logic hidden away in
> > kernel/irq/pm.c. I wasn't sure how actions could be manipulated during
> > suspend, which made me wary of moving them to a separate list.
>
> Moving them to a temporary list on suspend and restoring them on
> resume should not be a problem.
> The only drawback I see is that actions might be reordered after the
> first resume (anyway, relying on shared irq action order is dangerous
> IMHO).
We considered doing that too and saw some drawbacks (in addition to the
reordering of actions you've mentioned). It added just too much complexity
to the IRQ suspend-resume code.
I, personally, would be fine with adding an IRQ flag to silence the
warning mentioned by Alexandre. Something like IRQD_TIMER_SHARED that would
be set automatically if someone requested IRQF_TIMER | IRQF_SHARED.
Thoughts?
Rafael
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
