On 02/11/2015 01:40 PM, Mark Rutland wrote:
> On Wed, Feb 11, 2015 at 12:29:02PM +0000, Michal Simek wrote:
>> parallella - Use reference instead of hardcoded path
>> (linux,stdout-path)
>>
>> stdout-path is used by bootloader to identify console.
>>
>> Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
>> ---
>>
>> U-Boot driver model requires stdout-path.
>> ---
>> arch/arm/boot/dts/zynq-parallella.dts | 3 ++-
>> arch/arm/boot/dts/zynq-zc702.dts | 2 ++
>> arch/arm/boot/dts/zynq-zc706.dts | 2 ++
>> arch/arm/boot/dts/zynq-zed.dts | 2 ++
>> arch/arm/boot/dts/zynq-zybo.dts | 2 ++
>> 5 files changed, 10 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts
>> index 6a5f51daa708..45228a427006 100644
>> --- a/arch/arm/boot/dts/zynq-parallella.dts
>> +++ b/arch/arm/boot/dts/zynq-parallella.dts
>> @@ -35,7 +35,8 @@
>>
>> chosen {
>> bootargs = "console=ttyPS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
>> - linux,stdout-path = "/amba/serial@e0001000";
>> + linux,stdout-path = &uart1;
>> + stdout-path = &uart1;
>
> Given that you added aliases in the last patch, you can use that to
> refer to the serial:
>
> stdout-path - "serial0:115200n8";
>
> With or without the alias you can encode the UART configuration here
> too:
>
> stdout-path = "/amba/serial@e0001000:115200n8"
let me check this configuration if it is supported by u-boot.
>
> Which makes the expected configuration explicit without relying on the
> Linux-specific bootargs.
>
> Is there any reason to keep linux,stdout-path?
Agree when stdout-patch is defined there is no reason to use linux,stdout-patch.
Thanks,
Michal
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
