Re: [PATCH 06/10] dt-bindings: iio: dac: add bindings doc for AXI DAC driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2024-04-01 at 08:59 -0500, Rob Herring wrote:
> On Thu, Mar 28, 2024 at 02:22:30PM +0100, Nuno Sa wrote:
> > This adds the bindings documentation for the AXI DAC driver.
> 
> Bindings are for h/w blocks, not 'drivers'.
> 
> Reword the subject to only say 'bindings' once.
> 
> 
> > Signed-off-by: Nuno Sa <nuno.sa@xxxxxxxxxx>
> > ---
> >  .../devicetree/bindings/iio/dac/adi,axi-dac.yaml   | 62
> > ++++++++++++++++++++++
> >  MAINTAINERS                                        |  7 +++
> >  2 files changed, 69 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml
> > b/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml
> > new file mode 100644
> > index 000000000000..1018fd274f04
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml
> > @@ -0,0 +1,62 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/iio/dac/adi,axi-dac.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Analog Devices AXI DAC IP core
> > +
> > +maintainers:
> > +  - Nuno Sa <nuno.sa@xxxxxxxxxx>
> > +
> > +description: |
> > +  Analog Devices Generic AXI DAC IP core for interfacing a DAC device
> > +  with a high speed serial (JESD204B/C) or source synchronous parallel
> > +  interface (LVDS/CMOS).
> > +  Usually, some other interface type (i.e SPI) is used as a control
> > +  interface for the actual DAC, while this IP core will interface
> > +  to the data-lines of the DAC and handle the streaming of data into
> > +  memory via DMA.
> > +
> > +  https://wiki.analog.com/resources/fpga/docs/axi_dac_ip
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - adi,axi-dac-9.1.b
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  dmas:
> > +    maxItems: 1
> > +
> > +  dma-names:
> > +    items:
> > +      - const: tx
> 
> You don't need *-names if there is only 1 entry.

Looking at the dmaengine code [1], it actually looks like I should have this
property required, no?

[1]: https://elixir.bootlin.com/linux/v6.9-rc2/source/drivers/dma/of-dma.c#L270

- Nuno Sá







[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux